If specified, this will be used no matter what. If not, then we check if
sudo exists and use that, or else fall back on su.
Implements FS#32621
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add the 'lto' option to enable building with link time optimization
by adding '-flto' to both CFLAGS and CXXFLAGS. The 'lto' option can
be specificed both in the PKGBUILD or by setting the default in
makepkg.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
The macro hasn't been used since 2007 with commit
7f7da2b5fc. Although it was still copied
over into alpm_list.c an year or so later with commit ca1a1871 ("More
cleanup to alpm_list")
Just remove all instances of it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
In the autotools build, it only built in-tree, from cwd = doc/ and
resolving doc/../lib/libalpm
In the meson build, this accidentally worked if cwd =
pacman/builddir/ and resolved to builddir/../lib/libalpm/
But... this should always have been configured with the actual path to
the inputs. So, we will now proceed to do so.
Fixes building man3 if your out of tree builddir doesn't happen to be a
direct subdirectory of the source root.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
- only document public alpm items (alpm_*)
- hide typedef'd structs (_alpm_pkg_t shows as alpm_pkg_t)
- enable inline struct definitions (this stops having a man page for
every single struct)
Signed-off-by: Allan McRae <allan@archlinux.org>
With the recent 'multibar' interface changes TotalDownload has been disabled.
Now we have a new UI and we need to find another way to display this
information.
When 'TotalDownload' config option is enabled we are going to have an extra
progress bar at the bottom of the screen that shows how much of the entire
download has been completed.
Closes FS#68202
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It includes pacman.conf new 'ParallelDownloads' option that
specifies how many concurrent downloads cURL starts in parallel.
Add alpm_option_set_parallel_downloads() ALPM function that
allows to set this config option programmatically.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We (thought we) removed all modelines from the project in commit
860e4c4943, but apparently this one
sneaked in by virtue of this manpage being added to the project after
the "remove all the modelines" patch was submitted, but before it was
applied.
I must have failed to update the patch to remove it from this file also.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is useful for dumb terminals that do not support escape
sequences.
Signed-off-by: Ivy Foster <escondida@iff.ink>
Signed-off-by: Allan McRae <allan@archlinux.org>
Checksums arrays should be filled with values provided by upstream. We
currently have md5 set as an unsecure default, and are constantly asked to
change it to sha2. However, just changing the default to a stronger checksum
gives the user the impression that "makepkg -g" checksums are perfect.
Instead, change the default checksum to a CRC, to make it clear that any
checksum generated purely by "makepkg -g" is not ideal.
Signed-off-by: Allan McRae <allan@archlinux.org>
Generating checksums with "makepkg -g" only determines that the user of a
PKGBUILD has the same file as the packager (assuming no collision). This
means an upstream source could be maliciously changed and passed on as valid
by a PKGBUILD. To avoid this, it is essential that any checksums used in
a PKGBUILD are as provided by upstream.
Signed-off-by: Allan McRae <allan@archlinux.org>
It's difficult to find it embedded inside a prose paragraph.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently, it could be misread to say that a fragment is literally
'commit', rather than 'commit=somehash'. Anecdotally this does not seem
to be obvious to everyone, and rewording it certainly doesn't hurt.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This value is needed for reproducible builds. The reason is because
$BUILDDIR changes its behavior depending on whether it is the same as
$startdir, and the result is that we cannot know whether $srcdir (the
path that is potentially embedded into the final package) is actually
"$BUILDDIR/src" or "$BUILDDIR/$pkgbase/src".
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Distribute asciidoc sources for all manpages instead of remembering to
add files to both variables. Fixes regression in
377d47142f which broke building the
website from a dist tarball:
make: *** No rule to make target 'pacman-conf.8.html', needed by 'html'. Stop.
(Technically this regression is already fixed by commit
942b909829, but this is just going to keep
happening, I suspect, so we should fix the root cause.)
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The rust language supports $RUSTFLAGS to be used automatically in all
rustc invocations. Allow setting this in makepkg.conf (e.g. for
optimization or debuginfo support), and teach debug+strip to pass the
rustc command line argument necessary to rewrite source file paths in
the debugging symbols.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If we use make dist to create the official, signed release tarballs,
those will not have meson build files by default since autotools doesn't
know what they are.
Also distribute all src/common/ files. We never strictly needed any of
them to be distributed with autotools, because the dist tarball
dereferences the symlinks (???), but only some of them were being
distributed, and meson needs them to be in the right location as we only
build libcommon from the primary files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make it clearer that the targets are matched against both directories
and regular files and free up File to potentially refer specifically to
regular files in the future. File is retained as a deprecated alias for
Path for the time being to avoid breaking existing hooks and will be
removed in a future release.
See FS#53136.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Reworks the UI of -F according to FS#47949
In short -F replaces both -Fs and -Fo.
Searching for an exact path (target contains "/"), causes the output to
switch to the old -Fo output. Otherwise the old -Fs output is used.
Also strip the leading "/" from targets like how -Qo does.
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently this tells people that the settings should not be touched, but
we should just rely on the description of what it should be set to, and
leave it up to the user. With the previous patch, makepkg aborts if an
invalid value is set, greatly reducing the danger of it being badly
configured.
Also make this clearer by indicating when it would be useful to change
the settings -- i.e. disable compression -- and ensure their described
defaults are based on the ones established during ./configure or meson
setup.
Reported-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently this is scoped to the build() function, which is simply wrong
as it equally applies to any function. Simply moving the paragraphs up
to the main manpage section makes this clear.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Dummy callbacks are still present to prevent compiler warnings until
libalpm is delta free.
Also remove Delta parsing from pacman.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
If an alternative rootdir is specified in either meson or configure it's
not respected in the generated man pages.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
coreutils 8.26 in December 2016 added this new hashing method which is
compatible with the existing md5sum and sha*sum tool usage, while using
the blake2 hash algorithm.
makepkg uses coreutils to provide source file integrity checks via
${integ}sum binaries and it makes sense to offer this as an additional
option.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
