change pacman-dev@archlinux.org to pacmandev@lists.archlinux.org
Most of this is copyright notices but this also fixes FS#72129 by
updating the address in docs/index.asciidoc.
---
I could also update the email in the .po files as it's a simple find and
replace but I'm not sure if that's strictly done via transifex.
This permits storing the result of setcap during package() and applying
the resulting capabilities to the installed program. Formerly, it was
necessary to edit the binary after the fact (and thus dirty the file
according to -Qkk) by using an install scriptlet.
One problem that needs to be solved before this is useful, is preventing
the strip routine from destroying xattrs. This is taken care of in the
previous patch.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since commit 2ee7a8d8, there is no cleanup needed in this function. Just
return instead of jumping to the cleanup label.
Signed-off-by: Allan McRae <allan@archlinux.org>
While at it and for consistency move the assignment of the variable
'local' into the subsequent conditional.
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
sync:
As pointed out by Andrew Gregory there could be an error when adding
duplicates if they are two separate packages with the same name. Add a
check in alpm_add_pkg() to test whether the duplicate is actually the
same package, and if so, log a debug message and return success to skip
the package. If the duplicate is a different package return
ALPM_ERR_TRANS_DUP_TARGET and treat that error just like any other error
in pacman.
remove:
Change alpm_remove_pkg() to just log a debug message and return success
to skip duplicates. Remove the handling of ALPM_ERR_TRANS_DUP_TARGET in
pacman.
Also fixes FS#49377.
Suggested-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 2ee7a8d89a replaced a manual check
for a local package with a check for the "oldpkg" member, which gets set
at the beginning of the transaction. If the package was also in the
remove list, such as when a package gets replaced, it would no longer be
in the local db and pacman would try to remove it twice, resulting in
superfluous error messages.
Fixes: FS#50875, FS#55534
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Many of these are pointless (e.g. there is no need to explicitly turn on
spellchecking and language dictionaries for the manpages by default).
The only useful modelines are the ones enforcing the project coding
standards for indentation style (and "maybe" filetype/syntax, but
everything except the asciidoc manpages and makepkg.conf is already
autodetected), and indent style can be applied more easily with
.editorconfig
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
archive_read_extract() forces resolution of uid/gid to names
when extracting the tarball. This can lead to wrong file
ownership when using pacman with -r option and when uid/gid
differ in the host and in the chroot.
archive_read_extract2() uses uid's and gid's only. See also:
https://lists.archlinux.org/pipermail/pacman-dev/2017-March/021912.html
Signed-off-by: Armin K <krejzi@email.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Some database files (install, mtree, and changelog) are extracted
directly from the package, but DBONLY was skipping extraction
altogether, causing those files to be missing after the transaction.
Fixes#52052
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Some resources (memory or file descriptors) are not released on all
error paths.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Relying on localdb to determine which trigger operations should match is
completely broken for PostTransaction hooks because the localdb has
already been updated. Store a copy of the old version of any packages
being updated to use instead.
Fixes FS#47996
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Check if we overwrote an exiting pacnew file before unlinking it.
Otherwise, updating to a version with an unchanged file would delete
existing pacnew files.
FS#47993
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
libarchive will not extract a directory over an existing directory
symlink, making it impossible to replace a symlink with a directory
across packages. Adding the ARCHIVE_EXTRACT_UNLINK and
ARCHIVE_EXTRACT_SECURE_SYMLINKS causes libarchive to unlink the existing
symlink and prevents it from extracting any paths that contain
a symlink, which we should not be doing anyway.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
clang is wrong - dbfile is always used initialized in that function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
There was a lot of confusion regarding these warnings, particularly for
packages that create users post_install and then chown the directories.
Signed-off-by: Allan McRae <allan@archlinux.org>
Prevents the need to rename the file if we end up keeping it and ensures
that pacnew files always reflect the most recent version by overwriting
stale copies.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Leave user files in place and save new config files with a .pacnew
extension. This reduces the complexity of file extraction and respects
the principle that pacman shouldn't modify files it didn't create.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
If an error occurs the actual path being extracted is more useful than
the original path from the package file list. The original path is
still used for checks that use it directly.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
alpm's database files (.INSTALL, .MTREE, etc.) should be extracted no
matter what; skip mtree/needbackup/noextract/noupgrade checks for them.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
With globbing in NoExtract, these log events can quickly pile up hiding
important information from the log.
Signed-off-by: Allan McRae <allan@archlinux.org>
ALPM still adds a warning to the log, but doesn't emit an event about
said warning, instead using a specific event to let the frontend what
happened/how to inform the user.
Note that there are 2 cases for installing a .pacnew file, to not
overwrite user changes and because file is in NoUpgrade. In the later case
the warning was a bit different: it happened before and said "extracting"
instead of "installed." Now both happen after and are phrased the same.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This moves the "wrong args" error up from trans_commit to add_pkg when
used with a local pkg and adds the error for remove_pkg when used with
a sync pkg, which currently just removes the db entry.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of using two void* arguments for all events, we now send one
pointer to an alpm_event_t struct. This contains the type of event that
was triggered.
With this information, the pointer can then be typecasted to the
event-specific struct in order to get additional arguments.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
When calling open(), use O_CLOEXEC as much as possible to ensure the
file descriptor is closed when and if a process using libalpm forks.
For most of these cases, and especially in utility functions, the file
descriptor is opened and closed in the same function, so we don't have
too much to worry about. However, for things like the log file and
database lock file, we should ensure descriptors aren't left hanging
around for children to touch.
This patch is inspired by the problem in FS#36161, where an open file
descriptor to the current working directory prevents chroot() from
working on FreeBSD. We don't need this file descriptor in the child
process, so open it (and now several others) with O_CLOEXEC.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We will be adding event structs in the following patches.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This commit:
-- replaces space-based indents with tabs per the coding standards
-- removes extraneous whitespace (e.g. extra spaces between function args)
-- adds missing braces for a one-line if statement
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
This ensures that important events will be logged and consistent
regardless of the frontend. The need for global context in the event
callback is also removed. The event is logged before any post_* scripts
run, so this also moves the post_* script output underneath the event in
the log.
Fixes FS#36504
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
These references to bug numbers assume we will forever be using that bug
tracker. It is better to properly comment the code instead (which was
done in almost all cases anyway).
Signed-off-by: Allan McRae <allan@archlinux.org>
We currently only warn if a directory's permissions differ, but using -Qkk
on my system shows that directory permissions tend to change in packages
reasonably frequently without notice. Provide a warning in such cases
so that it can be altered. Example output:
(1/1) reinstalling nginx
warning: directory ownership differs on /var/lib/nginx/proxy/
filesystem: 33:0 package: 0:0
Signed-off-by: Allan McRae <allan@archlinux.org>
On operating systems we support, the behavior is always such that the
kernel will do the right thing as far as invalidating the file
descriptor, regardless of the eventual return value. Therefore,
potentially looping and calling close multiple times is wrong.
At best, we call close again on an invalid FD and throw a spurious EBADF
error. At worst, we might close an FD which doesn't belong to us when a
multi-threaded application opens its own file descriptor between
iterations of the loop.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
It is now possible to invert patterns in NoExtract and NoUpgrade.
This feature allows users to whitelist certain files that were
previously blacklisted by another entry.
Signed-off-by: Allan McRae <allan@archlinux.org>
