This causes package_$pkgname() to be preferred over package() in the
non-split case, but the behavior if both functions exist was
undocumented anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
The biggest issue is directly supplying the data within the format
string which can result in misinterpreting formatter sequences if a
printed variable contains an "%" in it. This character is currently
permitted in the pkgver field, though not in the pkgname. Also
pacman/libalpm itself has much looser limitations and this can appear
anywhere at all if a package was created by some other program.
For the package "iambroke-1%s-1-any.pkg.tar.xz", installed in the build
environment, the result is:
-> Generating .BUILDINFO file...
awk: cmd. line:3: (FILENAME=- FNR=1085) fatal: not enough arguments to satisfy format string
`-1%s-1'
^ ran out for this one
Followed by a .BUILDINFO which contains an LC_ALL=C sorted list of
$pkgname-${epoch:+$epoch:}$pkgver-$pkgrel-$arch ending in:
installed = iambroke
Which is cut short, then fails to list the succeeding packages. The
package itself successfully builds.
It's also unnecessary to save the output of pacman -Qq in order to get the
information for pacman -Qi, since the latter will, just like the former,
return information for all installed packages if not given a package
name(s).
While I am at it, pipe this directly to awk rather than keeping a copy
in an unnecessary local variable. This is slightly more efficient in
addition to preventing the <<< herestring from re-interpreting the
content of "$pkginfos" in ways that don't really matter for our usage.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This reverts commit 9e52a36794.
The change to use declare for the split package metadata backup/restore
resulted in variables being declared at a local scope. When these variables
were unset (mostly noticed with debug packaging) this left the variable at
global scope defined. Revert back to the known good state.
Signed-off-by: Allan McRae <allan@archlinux.org>
When comparing the $BUILDDIR to the $startdir, we used string equality
instead of testing whether they are the same location, and ended up
appending $pkgbase even though there's no reason to use it here.
In some cases, this could result in makepkg erroring when trying to
create $srcdir/$pkgdir, if a file with the same name as the $pkgbase
exists. This is expected behavior if a file "src" or "pkg" exists, but
decidedly less so for $pkgbase.
This could be fixed either by setting $startdir to an absolute path, or
by ensuring the test checks this directly; I've chosen to do both, since
the test should really be correctly checking the thing it actually cares
about, but since we ensure absolute paths are used everywhere else, this
might bite us elsewhere someday. It's also more consistent.
Fixes FS#58865
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
It's especially dangerous in trap handlers since the return value of the
function becomes the return value of the last command before the trap,
not the last command in the current function. This applies to any
function executed in a trap handler, nested functions included.
In one case, install_packages failed (via return 14), which was inside a
conditional that then ran exit 14, which triggered the EXIT handler,
which called clean_up, which called remove_deps, which had !RMDEPS and
thus returned. The return value of remove_deps became the return value
of install_packages, triggering the ERR handler, which (due to another
problem) was still the user function handler, which then printed a
misleading error message and overrode the exit code with 4.
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 8ff03868a3 PACMAN_OPTS was
turned into an array. Unfortunately, that array was generated by
treating the "--color never" option as one string, instead of an
array of two strings...
Fixes FS#58820
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
$restoretrap is empty if the trap was not set. This caused the trap
handler to remain and override later exit codes.
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit d8717a6a96 the write permission
checks were refactored. Initially we intended to drop this chmod in the
process, but due to some confusion about whether it was needed, I ended
up submitting patches both to preserve and to remove it... but it's not
needed after all. We do it on the individual $srcdir/$pkgdir, later on.
Then, we used the wrong version, which causes unnecessary restrictions.
See FS#58790
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit d8591dd341 when teaching
--packagelist to print the full filepath for built arches only, I forgot
to update the helptext at the same time as I updated the manpage.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 5698d7b66d a new non-root use of
pacman was added -- previously we used -T or -Qq, and run_pacman did not
know how to special-case -Qi to skip being prepended with sudo.
The result is:
-> Generating .BUILDINFO file...
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
[sudo] password for eschwartz:
-> Adding changelog file...
Fix this by using a more generic glob since neither -Q nor -T will ever
need sudo or PACMAN_OPTS
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Many of these are pointless (e.g. there is no need to explicitly turn on
spellchecking and language dictionaries for the manpages by default).
The only useful modelines are the ones enforcing the project coding
standards for indentation style (and "maybe" filetype/syntax, but
everything except the asciidoc manpages and makepkg.conf is already
autodetected), and indent style can be applied more easily with
.editorconfig
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Adding the architecture to the 'installed' elements of the .BUILDINFO
file makes it easier to retrieve the packages needed to reconstruct
the build environment.
Signed-off-by: Robin Broda <robin@broda.me>
Signed-off-by: Allan McRae <allan@archlinux.org>
Architecture information is required for repro tooling
This is a revised version of https://patchwork.archlinux.org/patch/475/
Signed-off-by: Robin Broda <robin@broda.me>
Signed-off-by: Allan McRae <allan@archlinux.org>
micro-optimization: We only care about temporarily enforcing extglob, so
that is the only one we need to explicitly restore.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Some scripts are using `break 2` to break out of the option parsing
loop.
Since a single `break` is sufficient in these cases, remove the extra
argument.
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than manually crafting foo_backup in a loop and eval'ing them
with a complicated escape pattern, store every splitpkg_overrides
element into a single variable via the eval-friendly `declare` builtin.
An alternative to eval would be using `printf -v` but this does not work
for arrays.
This has the additional benefit of reducing the number of
variables/arrays floating around in the environment.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently the only things we check are:
- Things that should be arrays, are not strings, and vice versa (this
was mostly copy-pasted from the similar code in lint_pkgbuild).
- Variables that are meant to contain pathname components cannot contain
a newline character, because newline characters in pathnames are weird
and also don't play well with future changes intended for the
--packagelist option.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Followup on c6b04c0465 which refactored
the signing function to run outside of fakeroot, and in the process
moved the status message to outside the $SIGNPKG check.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Additionally provide a separate error for failure to create the
directory vs lack of write permissions on a pre-existing directory.
This also means we now consistently try to create any nonexistent *DEST
directories as needed before aborting with E_FS_PERMISSIONS. Previously
only $BUILDDIR received that kindness.
Fixes FS#43537
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg configures the umask 0022 as a sane default for building
packages. After installing dependencies, it sources `/etc/profile`
again. If the user configured a umask other than Arch's default of
0022 (or 022) in `/etc/profile`, this sane default is now gone and
needs to be set again.
Signed-off-by: Allan McRae <allan@archlinux.org>
Before this change, LC_TIME=zh_TW.UTF-8 makepkg has the following line:
==> Making package: foobar 1-1 (日 2月 11 01:13:42 CST 2018)
With this patch, this line becomes:
==> Making package: foobar 1-1 (西元2018年02月11日 (週日) 01時13分57秒)
The latter is more natural for a Chinese native speaker.
Signed-off-by: Chih-Hsuan Yen <yan12125@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit ab2be5794d return codes were
implemented, and the output of install_package was improperly assigned
to a variable when the return code was wanted.
All we need to do is restore the previous exit handling, but return $?
instead of hardcoding "0".
Reported-by: xftroxgpx <xftroxgpx@protonmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 8bec63bf92 attempted to switch to
using -fdebug-prefix-map to set file locations in debug packages. It
make a few mistakes...
1) Adding debug C{,XX}FLAGS only worked if DBGSRCDIR was defined in
makepkg.conf. Fix this by falling back to the default value.
2) Using -fdebug-prefix-map altered a lot of assumptions about file
locations when copying source files into debug packages. This resulted
in lots of messages of failed cp in packaging output.
Signed-off-by: Allan McRae <allan@archlinux.org>
In eaa82b4d07 source_has_signature() was
modified to check if git repositories are marked as signed. However, due
to a typo the unused variable $netfile was checked. This worked as long
as the last source element was marked as signed, due to $netfile being
mistakenly set as a global in check_vcs_software(), but usually failed
with multiple sources.
Break this more consistently by properly declaring $netfile as a local
variable in check_vcs_software() which it should be regardless. Fix it
again by completely moving over to $netfile in source_has_signature()
as netfile is more descriptive of the current state.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 8b0d59b83a support was added for
storing the source files of binaries in debug packages. This made use of
the debugedit program which is part of the RPM package manager, which is
not very standalone.
The same effect can be achieved using -fdebug-prefix-map, an option
accepted by both the gcc and clang compilers which modifies how the
compiler itself stores the references to the source files rather than
requiring us to later edit the produced binaries. This also removes the
dependency on external programs like debugedit.
As a result of this change, source files will only be effectively added
for programs which actually use the exported CFLAGS. This is a reasonable
tradeoff as we expect our CFLAGS to be used rather than ignored. Upstream
software which do not produce useful debug packages are expected to fix
their build systems to respect the environment CFLAGS.
As a result of this change, the routine for extracting source filenames
from binaries had to be modified to derive the source file from the
final debug location, rather than the other way around.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows for more easily extending the list of allowed compression
methods, as it has to be modified in only one place.
Also allow the user to specify their own preferred command + options for
source packages in addition to compiled packages. Currently,
makepkg.conf(5) erroneously claims this is already possible.
The extra variables on the commandline were inconsistently applied. They
should override anything else, instead, most were overridden by
environment variables with the exception of BUILDDIR (and this was not
sanity-checked to see if it had write permissions).
e.g. given the commandline:
`PKGDEST="$(pwd)"` BUILDDIR="$(pwd)" makepkg PKGDEST=/doesnt/exist BUILDDIR=/doesnt/exist`
We would incorrectly use the current working directory for PKGDEST.
Meanwhile, we checked the wrong directory for BUILDDIR, and later
errored when we tried to create $srcdir inside the non-writable
directory "/doesnt/exist".
In order to fix this, use the preferred bash builtin for saving variable
definitions, similar to how we restore traps etc. rather than tediously
redefining each one by hand, and restore this immediately after
makepkg.conf is sourced. Finally, the `make`-style commandline overrides
are applied.
Also canonicalize_path is applied only on the final paths we try to use.
While it is unlikely the value in makepkg.conf will be a relative path,
since we now properly respect commandline overrides, they should be
canonicalized as well.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
For your convenience, makepkg now has 16 distinct ways to fail.
Also closes FS#54204.
Signed-off-by: Ivy Foster <iff@escondida.tk>
Signed-off-by: Allan McRae <allan@archlinux.org>
Not all sed implementations on linux accept the --follow-symlinks
argument, so let the user configure the arguments passed to sed if
required.
Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com>
[Allan: fixed configure summary output]
Signed-off-by: Allan McRae <allan@archlinux.org>
If SOURCE_DATE_EPOCH is set, `touch` all source files between the (optional)
prepare() and build() functions to unify the modification times. This works
around build systems and compilers that embed the file modification times
into the file contents of release artifacts.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The .BUILDINFO file should retain all the information needed to reproducibly
build a package. Add some extra information to the file and also provide a
version number to keep track of future changes.
Signed-off-by: Allan McRae <allan@archlinux.org>
In write_pkginfo, we checked if $PACKAGER was undefined, and gave a default
value if not. Just do this upfront to simplify this function.
Signed-off-by: Allan McRae <allan@archlinux.org>
There is little savings in only writing pkgbase when different to pkgname, and
it makes determining the pkgbase by parsing .PKGINFO slightly easier. Lets just
write it...
Signed-off-by: Allan McRae <allan@archlinux.org>
This patch introduces the SOURCE_DATE_EPOCH environmental variable. All files
in a package are adjusted to have their modification dates set to the value
of SOURCE_DATE_EPOCH, which defaults to "date +%s".
Setting this variable allows a package that is built twice in the same
environment to be (potentially) reproducible in that the checksum of the
generated package file will be the same.
Also adjust the compression of the mtree file to avoid gzip embedding a
timestamp.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
This information is duplicated (in less friendly format) in the "builddate"
entry and removing it improves reproducible packaging.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
With recent version of gpg, signing within fakeroot works on the first
invocation, but fails on later runs. Sign all packages outside of fakeroot
to avoid this issue.
Fixes FS#49946.
Signed-off-by: Allan McRae <allan@archlinux.org>
Setting PKGDEST and friends enables us to keep all built packages in a single
location. Symlinking these files into the build directory creates unnecessary
clutter and requires clean-up in multiple places when removing old version.
Signed-off-by: Allan McRae <allan@archlinux.org>
Delete log files for the pkgver and prepare functions if -c,--clean is
passed.
Fixes FS#51039 and FS#51075
Includes patch submitted by Christian Braun.
Signed-off-by: Michael Straube <straubem@gmx.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
By passing a NUL-separated filelist, this also fixes a bug where files
that look like bsdtar options in the package root could break the
package ("-C" was particularly troublesome because bsdtar interprets it
as an option anywhere in the file list, even following "--").
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We want to provide source files with debug symbol packages to allow easy
stepping through the program. This becomes difficult with split packages due
to the binaries in many of these sharing source files across packages.
There are (at least) two solutions to this problem. #1: ensure common source
files are located in the debug package for the package lowest in the dependency
chain and add dependencies to the debug packages so all require source files
are present, or #2: create one debug package for all split packages in a
PKGBUILD. The second is a more robust approach despite potentially creating
very large debug packages.
This patch creates a single $pkgbase-debug package and adds provides such that
installing $pkgname-debug will always work.
Signed-off-by: Allan McRae <allan@archlinux.org>
Allows lint_package to prevent makepkg from creating an invalid package.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The PKGINFO format cannot handle values that contain newlines.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Neither function was checking for the existence of actual results before
calling printf, resulting in them returning a list with a single empty
value if there were no depends/provides.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
