The ability to build only selected packages from a split package was
removed from makepkg, so this lint is no longer needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes failure to finalize download path if the package file already
exists but the .sig file does not.
This patch also moves .sig.part files which should be done for
completeness although it's probably rare/inconsequential for them to
exist.
Hopefully this is now the right approach now. The logic is as follows:
Check if dest_name or temp_name exists and try to move whichever
does.
If neither exist assume we're just downloading sig files and don't
error.
Figure out the .sig base filename.
Try to move the .sig file if one was needed and if that fails try
move the .sig.part file.
The patch leaves the logging as is. Maybe we should check if moves fail
for reasons other than non existence and log it properly. Though this is
probably rare and pacman will error out later anyway.
Fixes#256
The xdata field is an array of key=value entries that allow a packager to
include arbitrary metadata in the generated .PKGINFO.
Fixes#241.
Signed-off-by: Dominik Peteler <archlinux+gitlab@with-h.at>
This ensures (e.g.) that the "emptydirs" script runs last after
unneeded files have been deleted.
Fixes#184.
Signed-off-by: Allan McRae <allan@archlinux.org>
The file stream associated with downloads without a filename is not
being freed when downloading using the sandbox user.
Signed-off-by: Allan McRae <allan@archlinux.org>
Note that the user provided in the DownloadUser configuration option (if
set) needs to be able to access the directory specified with the --cachedir
argument.
Fixes#216.
Signed-off-by: Allan McRae <allan@archlinux.org>
This could help locate the real failure (instead of scrolling through the whole possibly-successful buildtime dep installation section) and also saves time on the operation.
Commit 7ccf316c provided "root" (or the user name for UID 0) as a
default download user. However, when DownloadUser is unset in pacman.conf,
pacman was overwriting the default with null. Rectify this.
Fixes#248
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the --wait-for-lock option will result in repo-add retrying to acquire the database lock file after 3 seconds. If the option is not set, exit with code 2 on lock failure.
While the event is already globally initialised, initialising the fields
prevents a valgrind warning (since the gcc-15 update).
Signed-off-by: Allan McRae <allan@archlinux.org>
Globally set `GIT_CONFIG_GLOBAL` and `GIT_CONFIG_SYSTEM` so that we're
only loading `/etc/makepkg.d/gitconfig` (if it exists) and no other Git
config files.
Allow injecting another value via `MAKEPKG_GIT_CONFIG`.
Fixes: https://gitlab.archlinux.org/pacman/pacman/-/issues/193
The manpage was lacking the database endings for various compression
algorithms that one can validly use, therefore we add these to the list.
Signed-off-by: Christian Heusel <christian@heusel.eu>
When using --ignorearch or options that imply it (e.g. --printsrcinfo),
all checks of the arch array were skipped. Instead, perform all checks
apart from confirming that the package can be built on that
architecture.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using gdb-add-index to add a .gdb_index section before splitting
debug info (together with enabling "maintenance set debuginfod
download-sections" in GDB) can dramatically reduce the amount of
data GDB has to download.
Fixes#205.
Signed-off-by: Allan McRae <allan@archlinux.org>
The current logic sets CCACHE_PREFIX to distcc when both distcc and
ccache are enabled. However, according to the source of ccache, it would
execute the command with execv, which would not look up arg0 from PATH,
unlike those exec functions with _p suffix.
This would result in the following error, when building a package with
both ccache and distcc enabled:
```
ccache: error: execute_noreturn of distcc failed: No such file or directory
```
This breaks package builds in different ways: packages that use make/cc
directly would yield the actual error which is the same as the above
line, packages that rely on other build systems wouldn't go through
compiler check and complain on a bad compiler.
To reproduce the problem, try to build a simple package:
```
git clone https://gitlab.archlinux.org/archlinux/packaging/packages/abc.git
cd abc
cp /etc/makepkg.conf .
echo 'BUILDENV=(distcc color ccache check !sign)' >> makepkg.conf
makepkg --config makepkg.conf
```
refs:
f887434d35/src/ccache/execute.cpp (L348)https://man.archlinux.org/man/exec.3.en#v_-_execv(),_execvp(),_execvpe()
Signed-off-by: Guoxin Pu <pugokushin@gmail.com>
Repeated values in the arch array can result in architecture specific
fields being repeated when using --printsrcinfo.
Signed-off-by: Allan McRae <allan@archlinux.org>
If sandboxuser is not set, pacman/libalpm does not handle moving
incomplete download files out of the temporary download directories
and into the cache. This leave download_XXXXXX directories in the
cache that cause warnings on -Sc operations.
Initialise the sandboxuser with the username of UID 0 (root on most
systems).
Fixes#209.
Signed-off-by: Allan McRae <allan@archlinux.org>
Variable replacements are not performed on code blocks leaving the
example Include usage with '{sysconfdir}/pacman.d/mirrorlist'.
Replace this with '/etc' consistent with other example blocks in the
man page.
Signed-off-by: Allan McRae <allan@archlinux.org>
The check for the format of the PACKAGER variable did not align with the
rest of the function where it was located. Move to its own function.
Signed-off-by: Allan McRae <allan@archlinux.org>
We use NPROC for managing the number of parallel jobs to run, so it is
essentially that this is a valid number. Add a lint pass, and move the
setting of the default value to this location.
Signed-off-by: Allan McRae <allan@archlinux.org>
Parallel processing of file stripping is causing a TOC/TOU race when copying
source files into the debug location resulting in error messages from cp.
While hiding this error is not the ideal solution, it is currently the only
one we have. Given this is a error of our own making, and we understand the
cause and have determined there is zero actual downside to ignoring the
error, we will accept this approach until something better is found.
Signed-off-by: Allan McRae <allan@archlinux.org>
Perform file stripping in parallel where possible. Hardlinks remain
processed one at a time due to reproducibility issues.
Signed-off-by: Allan McRae <allan@archlinux.org>
Handle singly and muptiply hard-linked files separately. Also collect
information on hard linked files to avoid searching the entire package
to check for hard links.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "safe_" prefix to strip_file() and strip_lto() to indicate that
these functions are taking extra steps to ensure permissions remain
unchanged.
Signed-off-by: Allan McRae <allan@archlinux.org>
Only a subset of checks were being performed on the overridden arch
arrays in package functions. Refactor checking such that all checks
are perform on all arch arrays.
Signed-off-by: Allan McRae <allan@archlinux.org>
The decision to set the PYTHONHASHSEED variable and its value is outside
the domain of makepkg and should be handled by a distribution. Move this
file to the libalpm-dropins project.
Signed-off-by: Allan McRae <allan@archlinux.org>
When the import key message was pushed to the pacman frontend, we no longer
displayed the length or algorithm used for the key, sticking to just the
user ID and the key ID.
Remove this code given this field is no longer used, and the code requires
updating for any now algorithm added.
Note: removal of the field from the alpm_pgpkey_t will happen in a separate
commit so that this commit can be readily backported.
Signed-off-by: Allan McRae <allan@archlinux.org>
Debug symbols should only be split from finally linked ELFs, not bare
object files. We're already excluding static libraries from splitting
for a similar reason.
The `.gnu_debuglink` sections are also mishandled by LLVM's LLD, which
copies them to its output. For example, this affects Arch Linux's
`/usr/lib/Scrt1.o`.
While we're here (and it changes the code less), also strip GNU LTO data
from bare objects, again for the same reason we're removing it from
static libraries, and apply static library stripping instead of shared
library stripping.
See: https://bugs.gentoo.org/787623
When objcopy encounters an already-present section, adding the new
debuglink will fail with a warning. Remove any existing `.gnu_debuglink`
section to work around this problem.
Arch Linux's `rust` package is affected by this. Apparently when LLVM's
LLD links in `/usr/lib/Scrt1.o` it will also copy the `.gnu_debuglink`
section.
See: https://bugs.gentoo.org/787623
Using objcopy can result in file permission changes. We work around this
by using "cat" to copy the temporary output file into the target. Extract
this code into a utility function.
Signed-off-by: Allan McRae <allan@archlinux.org>
For example, with landlock ABI < 3, LANDLOCK_ACCESS_FS_TRUNCATE is not
set in ruleset_attr.handled_access_fs, so it should not be set in
path_beneath.allowed_access either. Otherwise, landlock_add_rule fails
with -EINVAL, and pacman complains:
> error: restricting filesystem access failed because the landlock rule for the temporary download directory could not be added!
The change is tested on Debian Bookworm kernel
linux-image-6.1.0-25-cloud-amd64 6.1.106-3.
Some libaplm utilities sync databases as a non-root user for use in
actvities other than system updates. The ability to download as a
non-root user was broken as part of the download sandboxing.
Applying a minimial fix by preventing the chown of the downloaded file
if the user is non-root. A larger change increasing the robustness
and error checking of this path is warranted in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
Sorting modifies the list in place, causing any existing pointers to the
list to point to a random element.
Fixes#165
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Git commands can fail in bare repositories when global git config contains safe.bareRepository=explicit.
Some users set this option for increased security.
To be compatible with this configuration, explicitly set safe.bareRepository=all when invoking git in a bare repository.
In f91fa546 (repo-add: do not recreate the database if nothing was changed),
repo-add was made to skip database write-out if there were no changes to
the database. However, this breaks the usage of repo-add to create a new
empty database: `repo-add /path/to/mydb/mydb.db.tar.xz`.
Bring back support for this use-case by always writing the database if
it is missing.
Original-patch-by: Ivan Shapovalov <intelfx@intelfx.name>
Signed-off-by: Allan McRae <allan@archlinux.org>
The Arch sharutils package was spewing messages about "Permission denied" when
copying source files into the debug package. This is due to the source files
having 444 permissions and being used in multiple binaries. Only copy each
source file into the debug package onces to avoid this error.
Signed-off-by: Allan McRae <allan@archlinux.org>
If a package was already downloaded but its signature file was not,
pacman would download the signature then error out despite all files
being present.
Also fixes a similar error when some, but not all, package databases
were updated with -Sy.
Fixes#156
Signed-off-by: Allan McRae <allan@archlinux.org>
The calculation used the size of the package rather than the amount
remaining to download for partially downloaded packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
On Windows based systems (e.g. msys), running PKGBUILD linting is very
slow due to time taken spawning bash subshells. Additionally, some packages
have extreme amounts of (usually procedurally generated) splitting, which
also causes linting to be extremely slow. Provide an environment variable
to disable PKGBUILD linting.
Signed-off-by: Allan McRae <allan@archlinux.org>
Supporting git source fragments (branch, commit, tag) is difficult in
conjunction with GITFLAGS usage - particularly with the most common
use cases that reduce the amount of data cloned from the upstream repo.
Leaving GITFLAGS in place an documenting that various git source features
are not supported when GITFLAGS are in used is not an ideal 'solution'.
Instead, remove GITFLAGS support.
Signed-off-by: Allan McRae <allan@archlinux.org>
This causes issues when repeatedly building a package using the same
git checkout. There is also ambiguity of the default checkout when
trying to build from HEAD. See #142 and #143.
This reverts commit 85c421f1cb.
Add the -k parameter to the sudo call to prevent caching of credientials.
This would (potentailly) stop a rogue sudo use within a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a new error code to expose the 'not a clone of' error state of some source
providers (git and fossil). This allows other tools integrating further and
handle this specific error state.
One usecase evolves around frequently changing source locations in PKGBUILDs
of packages in the AUR.
It's extremely hard to figure out what's going from when bsdtar fails
here when we expect it to succeed. Stop tunneling stderr to /dev/null
to help users figure out what's going on when this fails.
Let meson deal with the system differences instead of handling
it manually.
The custom dependency was added in meson 0.59, then gained
static support with 0.60, and static support for cygwin with 0.61,
which is why the meson requirement is bumped to 0.61.
Debian bullseye ships meson 0.56, so switch to bookworm which
has 1.0.1
Work around the final line not being parsed in .PKGINFO if there was a lack
of newline at the end of the file. This could occur due to utilising a tool
other than makepkg to create packages.
The missed line created a difference in the parsing of .PKGINFO between
repo-add and pacman, causing packages to be seen as invalidwith pacman-6.1.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bailing early when there are 0 blocks remaining means that we do not call
memchr on a NULL string (although with a 0 size parameter). Fixes issues
reported using -fsanitise=address,undefined
Signed-off-by: Allan McRae <allan@archlinux.org>
The dir_is_mountpoint() function has the explicit requirement that the
trailing slash of the directory is present. We strip the trailing slash
in unlink_file() to handle directories replaced with symlinks, but that
then affects the dir_is_mountpoint() check.
Add the trailing slash when we have established we are dealing with a
directory. Note this may fail in the case of a file managed by pacmane
with name length of PATH_MAX that has been replaced by a directory on the
file system. Bail on this unlikely scenario.
In addtion, be less fancy with adjusting length of the file char array.
Signed-off-by: Allan McRae <allan@archlinux.org>
Removing lock-never from the default gpg.conf file exposed a couple of bugs
in the permission checks in pacman-key.
Signed-off-by: Allan McRae <allan@archlinux.org>
A filelist can be non-NULL but empty (particularly with a lot of
NoExtract entries). Handle this in alpm_filelist_contains()
Identified using the undefined behaviour sanitizer.
Signed-off-by: Allan McRae <allan@archlinux.org>
Filling in more of the payload fields before passing to the downloader ensures
that the these fields do not get lost during sandboxed operations.
It also fixes the use of -U with XferCommand, but testsuite still fails due to
"404" page being downloaded for the signature. Given we can not identify this
as being a non-signature download with the XferCommand, we can just turn off
signature checking in this test.
Signed-off-by: Allan McRae <allan@archlinux.org>
If the SandboxUser configure option is set, the internal downloader
will fork of a child process and drop to the specified user to download
the files.
Signed-off-by: Remi Gacogne <rgacogne@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add log and download callbacks to use within a sandbox. These are
designed to be passed from the sandbox to the parent through a file
descriptor and then processed into alpm callbacks to be passed to the
frontend.
Note, only callbacks used in libalpm are added. Other callbacks should
be set to NULL in the child process.
Add alpm_sandbox_child() function that will be used for switching to a
less priviledged user to run child processes.
Signed-off-by: Allan McRae <allan@archlinux.org>
The DownloadUser option will be used to drop privledges to the
specified user when downloading files.
The intention is for this to be extended in the future to a more
general sandbox configuration to cover operating on package and
database files prior to verification.
Add this option to pacman configuration and the various accessors into
the libalpm backend.
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously, the for loops on lines 1035 and 1037 would advance to the
next element in the server list, even if downloading the URL succeeded.
If there are no more servers in the list, `s` would be NULL, causing
a NULL pointer dereference on line 1046. If there were servers left
in the list, the signature would be downloaded from a wrong URL.
1. Fetching of database signatures is enabled.
2. There is only one enabled remote repository URL, or fetching from
all but the last one fails and fetching from the last one succeeds.
3. An XferCommand is used.
Qubes OS Arch templates satisfy all of these conditions and trigger the bug.
We were indirectly adjusting a pointer to a parameter that was declared
as a const. This resulted in a use-after-free when using --debug:
[11:09:18] debug: config: finished parsing ��A�8_
Signed-off-by: Allan McRae <allan@archlinux.org>
The bug tracker had been updated in doc/index.asciidoc, but the one in
doc/footer.asciidoc was still the old one, which is a deadlink now.
I udpated it just by copying the sentense in doc/index.asciidoc
Signed-off-by: Dale young <daleyoung4242@gmail.com>
We only really need debugedit while building the package, while this
check would run if you tried something like `makepkg --verifysource`.
Use the same checks as we have for fakeroot to wrap debugedit so we
don't beg for dependencies we don't need.
Fixes: 3ed08f97ec
Signed-off-by: Morten Linderud <morten@linderud.pw>
Not actually a fix, as the pacman output will still be weird and
we will not gracefully exit, but it does print an error message...
Signed-off-by: Allan McRae <allan@archlinux.org>
The current code treats -k/--key as a binary option which later makes it
fail parsing the argument as then the end of arguments '--' is treated
as the GPGKEY. We fix this by adding the appropriate specifier to the
long and shortopt.
Closes https://gitlab.archlinux.org/pacman/pacman/-/issues/105
Fixes: 4f43ce3e ("repo-add: use parseopts from libmakepkg")
Signed-off-by: Christian Heusel <christian@heusel.eu>
The third parameter to wcstombs() is the length of the output buffer
(first parameter) in bytes. Take the correct sizeof() here.
This is not a problem in practice, but prevents _FORTIFY_SOURCE=3 from
detecting a possible output buffer overflow (as the source buffer is
bigger than the destination).
Fixes#104.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Setting sysroot to / is not the same as having no sysroot, because the
sysroot is prepended to ALL config paths including relative ones:
$ cd /etc
$ pacman --config=pacman.conf
error: config file /pacman.conf could not be read: No such file or directory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
We use an extended glob here, but were relying on having it globally set
in makepkg. This causes it to fail when used in scripts.
Since scripts using libmakepkg may not want extglob to be set, save and
restore the environment while explicitly setting extglob only where we
need it.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
In pacman's progress callback, pkgname being null may result in a
segfault, due to undefined printf behaviour. libalpm always passes
at least an empty string for pkgname, so this situation is largely
avoided.
However, the callback mostly checked for pkgname's being non-null
and not empty. This means a additional space was being added to
the output messages (although with zero actual effect on the output).
Be a bit more robust here by treating null and empty pkgname the
same and fixing the invisible output issue...
Signed-off-by: Allan McRae <allan@archlinux.org>
A potential buffer overflow could occur if a detected terminal escape
sequence was not for a terminal colour (i.e. did not contain an "m").
Fix the potential buffer overflow while explicitly detecting only
terminal colour escape sequences. Any other escape sequence is
unexpected, and just gets pushed to the terminal.
Signed-off-by: Allan McRae <allan@archlinux.org>
I'm not sure why this was originally included, but it has now become
a problem with multiple processes updating the keyring (e.g. the
systemd timer for WKD updates from Arch Linux).
Signed-off-by: Allan McRae <allan@archlinux.org>
Adding more and more languages will make the man page become increasingly
difficult to navigate. Move documentation into the configuration file
where variables are defined.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bailing early caused problems with makepkg failing on verify but expired
signatures. As this is often out of the packagers control, and it is
better to verify a signature than not, we try bailing as late as possible
and let makepkg warn about the expired signature.
Signed-off-by: Allan McRae <allan@archlinux.org>
The previous chroot-based sysroot often broke due to glibc's delayed
loading for much of its functionality when the sysroot did not contain
compatible copies of the necessary libraries.
This approach instead manually prepends the sysroot to all configuration
paths.
BREAKING CHANGE: targets to -U are no longer interpreted relative to
sysroot
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Guile 2.2 uses ELF format for its byte-compiled files. These are not
normal executables, and are not strippable in the normal sense.
Given these are ELF files and detected by "file" as non-stripped binaries,
it is only possible to skip these using the file path.
Fixes#73
Signed-off-by: Allan McRae <allan@archlinux.org>
Also include a section encouraging discussion of large changes as there have
been a number of case of rejected features being reinvented.
Fixes#34
Signed-off-by: Allan McRae <allan@archlinux.org>
We have added more options to makepkg, but adding them to the man
page entry would result in line wrapping on a standard width
terminal. Instead, trucate and add ellipsis to indicate more
members (as described in the section below).
Fixes#91
Signed-off-by: Allan McRae <allan@archlinux.org>
atio's behaviour is undefined if the input is not valid. Also it does
all sorts of whitespace and prefix handling which we don't need for
pkgreason.
Instead of going into UB on invalid input we now return EXPLICIT as the
fallback and print an error. However we don't actually error out as the
DB parsing tries to be error tolerant.
Signed-off-by: Allan McRae <allan@archlinux.org>
alpm has certain requirements for package metadata necessary for proper
functioning, name and version in particular. These requirements are
already enforced in makepkg, but nowhere in alpm.
Exceptions are treated as errors for non-local packages because they
cannot be installed without potentially resulting in undefined behavior.
Exceptions for local packages are treated as warnings because they are
already installed, so any damage has already been done, and the user
would otherwise have no way to uninstall them.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
The error path uconditinally tries to free the archive, leading to a
double-free segmentation fault if the error path is triggered after
already freeing it.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
The free function was checking DB_STATUS_PKGCACHE, which is only set
once the package cache has been fully built.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
To ensure we are not dropping the return code of the `gpg` call due to
piping into `grep`, we make use of `PIPESTATUS` to check the return code
of each command separately.
Additionally, we can now distinguish between two states: The signature
does not verify (e.g. due to technical reasons) and the signature is
not trusted.
Signed-off-by: David Runge <dvzrv@archlinux.org>
Move the check for the `NEWSIG` metadata keyword contained in the
GnuPG based statusfile to `parse_gpg_statusfile()` so that it is also
run when creating the statusfile in `verify_file_signature()` and not
only when running `verify_git_signature()`.
Signed-off-by: David Runge <dvzrv@archlinux.org>
The output of
`gpg --quiet --batch --status-fd /dev/stdout --verify <signature_file> <file> 2> /dev/null`
or
`git verify-commit --raw <commit> 2>&1`
may contain binary data, if the signature has been created with an
OpenPGP implementation, that e.g. makes use of notations.
If the notation string (see `NOTATION_DATA` in /usr/share/doc/gnupg/
DETAILS) contains a trailing binary char, this will break signature
verification, as any following entry (e.g. `VALIDSIG`) will be offset.
As we are only making use of a narrow set of terms from the statusfile
(namely `NEWSIG`, `GOODSIG`, `EXPSIG`, `EXPKEYSIG`, `REVKEYSIG`,
`BADSIG`, `ERRSIG`, `VALIDSIG`, `TRUST_UNDEFINED`, `TRUST_NEVER`,
`TRUST_MARGINAL`, `TRUST_FULLY`, `TRUST_ULTIMATE`), we are applying a
filter, so that only understood terms are written to the file.
Signed-off-by: David Runge <dvzrv@archlinux.org>
Emit an early error message if tag or commit verification with git or
detached signature verification with gpg fails.
Make `verify_file_signature()` and `verify_git_signature()` return
non-zero in this case and set errors to `1`, so that later checks
in `check_pgpsigs()`, although still run, can not lead to a positive
result.
Signed-off-by: David Runge <dvzrv@archlinux.org>
In the very unlikely situtation where getmntent() and friends return
non-null, but the mount directory is NULL, a null dereference could
occur. It is unclear what the best course of action is in this case,
so just move on to the next mount point.
Signed-off-by: Allan McRae <allan@archlinux.org>
If a path length exceeds the PATH_MAX value, then it gets truncated
when building the path of the file to delete. This could (in a very
unlikely case...) result in the wrong file being deleted. Check the
path fittedin the buffer before removing files.
Signed-off-by: Allan McRae <allan@archlinux.org>
The length_check function could underflow if the provided buffer index
is greater than the signature buffer length, leading to an out of
bounds read.
Signed-off-by: Allan McRae <allan@archlinux.org>
These are the only log messages produced by pacman that include an
embedded newline, and it looks very incongruous in a typical pacman.log.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move the checks for software and gpg signing ability to after the
fakeroot section so that it is only executed once. This also fixes
gpg (lack of) interaction under fakeroot.
Fixes#69
Signed-off-by: Allan McRae <allan@archlinux.org>
The primary purpose of this is to allow cleanup of file descriptors
allocated by curl that were left open in the child. I am not aware of
any issues caused by the open file descriptors, but think it better to
not leave random open fd's lying around.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Freeing handle resources was previously split awkwardly between
_alpm_handle_free and alpm_release. This consolidates the freeing of
all in-memory resources to _alpm_handle_free, leaving alpm_release as a
thin wrapper that provides safety checks and frees any external
resources, e.g. removing lock files.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
.a files are not valid ELF files so we can't run objcopy nor debugedit
on them.
Rename STRIPLTO to STATICLIB to be more descriptive.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Some projects might duplicate the file in multiple locations for one
reason or another. When debug packages are enabled, `makepkg` will only
strip the first occurrence of the binary and abort early on all the
other binaries.
Signed-off-by: Morten Linderud <morten@linderud.pw>
It does very little, is only used in one place, and can't easily be
reused for other server types due to the inclusion of an error message.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Cache servers differ from regular servers in that they do not produce
warnings and are not removed from the server pool for "soft errors"
(i.e. the server was reachable, but the download failed) and they are
not used for databases. If a host is used for both a cache server and a
regular server, it may still be removed from the server pool for soft
errors that occur when used as cache server and removal from the server
pool for soft errors will not affect future attempted use as a cache
server.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Meson automatically sets _FILE_OFFSET_BITS but that value was not
getting carried through to the libalpm pkgconfig file, breaking
downstream projects that relied on it.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
During a package build we call prepare_buildenv in multiple stages of
the process. For debug packages, one of the hooks is buildenv_debugflags
which populates the debug flags to the according variables.
The issue is that the behavior of the current implementation of
buildenv_debugflags is not idempotent, so consecutive calls will append
the same flags again. In certain cases this isn't an issue, however
for context aware build frontends like cargo any change of the build
inputs leads to a fresh build. This means that any invocation of such
a build ecosystem inside the package() function will trigger a full
rebuild, which is not desired.
To fix this issue, this commit makes buildenv_debugflags idempotent
by only appending flags once to the target variables.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
Currently, the file glob used to clean the $srcdir misses dotfiles.
This commit instead removes the directory entirely and recreates it.
Since the directory has to exist prior to deletion, the creation commands
are duplicated. Perhaps they could be moved to a function later on.
The directory cannot be removed while inside it, so the directory change
is moved down the line. One important insight here is that almost all functions
after it are actually independent of $pwd, allowing the optimization of just
not changing directory. They do however depend on the existence of $srcdir, so
it has to be recreated.
The only exception to this is `extract_sources` which depends on $pwd being $srcdir.
An alternative proposal wanted to extend the file matching for deletion, but it
was deemed impractical.
chroot() requires CAP_SYS_CHROOT. If the caller has put us in the
right root directory already, don't call chroot(). This allows
running pacman in a containerized environment without CAP_SYS_CHROOT.
This patch implements a new verify function in makepkg. It allows us to
do arbitrary authentication on sources before extraction.
There are several new signing and validation methods being implemented
and it would be hard to have `makepkg` implement support for things such
as sequoia, cosign or minisign. This would allow us to distribute
generic validation functions.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Some user had erros while updating their system.
:: Proceed with installation? [Y/n]
:: Retrieving packages...
checking keyring...
checking package integrity...
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
The issue was filecache_find returning null and alpm passing that null
path to check validity. How this happened I have no idea. It may be
something to do with the user's cachedir being a network drive.
Also warn when the file exists but it is not a regular file or can not
be opened.
Clarify if repo-add does not create a new database due to failures
or due to there being nothing to do.
Signed-off-by: Allan McRae <allan@archlinux.org>
As noted in the fakechroot(1) man page, fakeroot and fakechroot
might wrap the same C library functions. Arch Linux hit this
recently with calls to stat(). It is important to start the fake
environment in proper order - fakeroot should be started inside
fakechroot.
Signed-off-by: Allan McRae <allan@archlinux.org>
Passing a path with a trailing slash to --root or --rootdir can lead to a
double slash at the start of paths. e.g.
$ pacman --root / -v 2>1 | grep " //"
Log File : //var/log/pacman.log
In MSYS2, paths starting with // will hit the network and fail.
Avoid this be explicitly stripping the trailing / from paths passed to these
flags.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is similar to -C in git/make/nina. Sadly -C is already taken for
us.
This is useful for scripts where you for loop over packages, as well as
when I'm testing makepkg builds and I'm too lazy to cd.
Add provides "%P" and replaces "%R" as format attribute.
Signed-off-by: Jelle van der Waa <jelle@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Replace concat_alpm_depends() with concat_list() which takes an
additional parameter to handle the formatting of non-string
data types.
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg assumes that the remote git repo is named "origin" at several
places in its handling of git sources. It is possible to set the remote
repo name since git v2.30.0 (with bug fix for bare checkouts in v2.30.2).
Add "--origin=origin" to all git clone commands.
Signed-off-by: Allan McRae <allan@archlinux.org>
When ever pacman prints a conflict, it now prints pkgname-version,
instead of just pkgname.
alpm_conflict_t now carries *alpm_pkg_ts instead of just the
names of each package.
Fixes FS#12536 (point 2)
Controlling the type of getmntinfo's param was decided by
whether or not we had the statvfs type avaliable. But getmntinfo uses
statfs regardless of this except on netbsd where it uses statvfs.
Add a check to detect which type our version of the function uses.
MD5 isn't a very good checksum, and the PKGBUILD page on the Arch Wiki
states that it should not be used, instead recommending sha256 or b2.
This patch changes the default from md5 to sha256 because that seems to
be the most commonly used checksum today.
Signed-off-by: Ben Westover <kwestover.kw@gmail.com>
This feature makes bzr VCS build inputs immutable by adding support for
pinning a bzr checkout by a hash of its content using the deterministic
export functionality `bzr export`.
This feature allows to preserve security implications of immutable build inputs
using a trusted cryptographic hash function of the content.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
This feature makes Mercurial VCS build inputs immutable by adding
support for pinning a Mercurial checkout by a hash of its content using
the deterministic export functionality `hg archive`.
This feature aids packagers by allowing them to use simple and
convenient refnames (instead of full commit hashes) in the `PKGBUILD`
while still preserving security implications of immutable build inputs
using a trusted cryptographic hash function of the content.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
This feature makes Git VCS build inputs immutable by adding support for
pinning a Git checkout by a hash of its content using the deterministic
export functionality `git archive`.
This feature aids packagers by allowing them to use simple and
convenient refnames (instead of full commit hashes) in the `PKGBUILD`
while still preserving security implications of immutable build inputs
using a trusted cryptographic hash function of the content.
Previously VCS source downloads have been skipped for `--geninteg` and
`--source` as both options did not need a checkout. This commit changes
this behavior by forcing the download of all sources as integrity checks
and generation requires to have an up to date state.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
This was lost in the transition from autotools to meson. No additional
warnings are given with current gcc and clang.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move rust related buildflags to their own configuration file to
provide an example of how other languages could be supported.
Signed-off-by: Allan McRae <allan@archlinux.org>
When 'options=('!buildflags') is used, we want to ensure our
buildflags are cleared first. Currently this happens due to luck
of alphabetical ordering, but this could change with libmakepkg
drop-ins.
Signed-off-by: Allan McRae <allan@archlinux.org>
There are two strings that may be singular or plural in pacman-key.
Use ngettext to handle these strings correctly, and provide a fallback
function if it is not available.
Fixes FS#70556.
Signed-off-by: Allan McRae <allan@archlinux.org>
The function _keys is a bit generic and can result in clashes. Change
other functions starting with _key_ to be _pacman_key_ as well.
Fixes FS#74507.
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 4f43ce3e4a broke repo-add by
switching to parseopts without accounting for the added "--". This caused
the dbname to always be read as "--".
Accounts for "--" and makes repo-add respect "--" as end of opts.
When package software with debug symbols without stripping, we should
still process the files with debugedit and include the needed source
files in the package.
Signed-off-by: Allan McRae <allan@archlinux.org>
We have not set handle in the function at this stage, so we can not
assign an error to it. Pass the handle to the function to avoid
waiting until the payload is retrieved.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move closing of the file descriptor until the end of the function, as
any following error will lead to a "goto error" that attempts to close
it again.
Signed-off-by: Allan McRae <allan@archlinux.org>
This also prevents a use-after-free issue where we free the list we
are interating over and the do i->next.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bash-5.2 introduced the patsub_replacement shell option, which is enabled
by default. Apparently is it supposed to handle a sed-like idiom, but
what it does achieve is making any substitution involving a "&" requiring
special care.
For makepkg's DLAGENTS, we replace "%o" and "%u" if present. Any "&" in
the replacement fields triggers patsub_replacement unless quoted. This is
particularly important for the URL field.
Add relevant quotes to avoid issues.
Signed-off-by: Allan McRae <allan@archlinux.org>
md5sums are cryptographically broken and we supply sha256sums to verify
files on a users system have not been modified from the packaged version.
Signed-off-by: Allan McRae <allan@archlinux.org>
Keeping md5sums in the repo databases no longer serves a real purpose.
md5sums are no longer considered secure, and we already have sha256sums
in the repos (along with PGP verification).
Signed-off-by: Allan McRae <allan@archlinux.org>
The example makepkg.conf.in suggests using "PKGDEST=/home/packages". It makes
sense to use the same path for the custom repo example in pacman.conf.in.
Fixes FS#48497.
Signed-off-by: Allan McRae <allan@archlinux.org>
The currently used openssl interfaces for calculating checksums have been
deprecated in openssl-3.0. Move to the modern interfaces to avoid build
warnings.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bash sources user configuration files under a number of conditions that
can cause issues with scripts when bash is used as the scriptlet shell.
Bash assumes it's being run under rsh/ssh if stdin is connected to a
socket and sources the user bashrc unless the environment variable
$SHLVL is >= 2. Commit 6a4c6a02de
switched from pipes to sockets when communicating with child processes
to work around SIGPIPE issues. Normally $SHLVL would be inherited from
the shell running pacman, but operations involving scriptlets are
generally run with sudo which does not let the $SHLVL variable through
unless specifically configured to.
Similarly $BASH_ENV can cause bash to source user-specified configuration
files if set.
https://lists.gnu.org/archive/html/help-bash/2022-02/msg00082.html
Note: the list discussion and bash source all reference SHLVL >= 2, this
is the SHLVL value *after* bash has incremented it on startup. Setting
it to 1 in pacman is sufficient to disable the unwanted behavior.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
`.o` objects used to be omitted by strip.sh due to a missing match in
the `Relocatable file` section. This patch fixes the issue by handling
`.o` objects similar to kernel modules.
fixes FS#74941
Signed-off-by: Allan McRae <allan@archlinux.org>
`${pkgbase}` was added to the wrong invocation. This ensures we are
producing correct debug packages.
Example from the package:
/usr/src/debug/pacman/pacman-6.0.2/src/pacman/callback.c
/usr/src/debug/pacman/pacman-6.0.2/src/pacman/callback.h
/usr/src/debug/pacman/pacman-6.0.2/src/pacman/check.c
/usr/src/debug/pacman/pacman-6.0.2/src/pacman/check.h
Fixes: 776b7c1e75 ("debugflags: Ensure we have unique source paths")
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
The debugedit call to list all source files may include things like
build/<...>. We have been filtering out these <> files, but they can
point to the build directory which is important to be available for
relative source paths stored in the .debug files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Bash 5.2 has a new globskipdots option, which is enabled by default. The
check_dotfiles lint fails with globskipdots due to the assumption that
at least the "." and ".." paths will match. Disabling globskipdots would
be the usual solution, but that fails on bash<5.2. Instead, enable
nullglob for this check.
Signed-off-by: Allan McRae <allan@archlinux.org>
There are two "binaries" that are currently missing documentation,
pacman-db-upgrade and testpkg. This patch adds that documentation.
Signed-off-by: Ben Westover <kwestover.kw@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit e017a5975c introduced the GITFLAGS
environmental variable. While ensuring the default of "--mirror" was
kept, there was a capitalisation mistake made. Handle the default for
GITFLAGS directly in the git clone command.
The default flag used to clone a git repository when using makepkg
is "--mirror". However, when working with huge repositories, the use
of different flags during cloning can allow an faster checkout. For
example, using "--filter=blob:none" allows for small checkouts, at
the expense of requiring downloads during the build stage if anything
but the HEAD commit is used for the build. In addition, this example
would serve as a replacement for the often requested (but broken)
addition of --depth=1.
Add support for the environment variable GITFLAG to pass flags for
the git clone command. Note that this overrides the default rather
than adding to it in order to prevent incompatibilities.
On Debian, keyrings are stored in /usr/share/keyrings. To support
this, let's add a new --keyringdir option that allows configuring
the directory under datarootdir where the keyrings should be
imported from. We default to 'pacman/keyrings' for backwards
compatibility.
For some terminal widths, the "C"/"c" character does not alternate at
regular intervals, but may look like it is stuck at either lowercase or
uppercase.
The previous behavior toggled based on the character position, while this
new behavior toggles the chomp alternation based on the progress percentage value.
This leads to slightly improved chomping.
Signed-off-by: Alexander F. Rødseth <xyproto@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The fill_progress function is called from two locations,
and both locations pass in the same percentage value twice.
This patch modifies the function signature to to receive the
percentage value just once.
Signed-off-by: Alexander F. Rødseth <xyproto@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Apparently that function was deprecated in 0.56, so use the generic
getter introduced in 0.51 instead. This squashes a warning.
Signed-off-by: Joe Baldino <pedanticdm@gmx.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
It's possible that the cursor does not reappear after pressing ^C during
shutdown. In my case, I noticed this when pressing ^C after getting
results from `pacman -F` -- this can reasonably reliably be triggered by
issuing a file query and pressing ^C shortly after results are shown.
There are two reasons for this issue:
1. The graceful SIGINT handler is removed at the start of cleanup(), but
the window from entering cleanup() to reaching exit() is non trivial.
The main offender is FREELIST(pm_targets), which on my T14s takes
>0.1s to execute. This means that if you are unlucky enough to press
^C while there, the cursor isn't coming back, because we haven't
issued any command to show the cursor again yet, and the userspace
signal handler is already blown away.
2. Moving console_cursor_show() to earlier in cleanup() only half solves
the issue. While it's fine not to flush after _hiding_ the cursor,
since it will at least make itself apparent before any other text
reaches the screen, _showing_ the cursor must be followed by flushing
stdout, because once the graceful SIGINT handler is gone, if you
press ^C, no flush will be triggered (and thus there will be no
cursor).
This fixes the issue by always starting out by showing the cursor again
at cleanup() time. This means that no matter where we get caught at ^C,
we will not end up leaving the terminal without its beloved ensign.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Allan McRae <allan@archlinux.org>
The last user of ABORT_SIGINT was removed in commit 84723cab5d
("Cleanup the old sequential download code"), and this isn't exported as
part of the public API.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Allan McRae <allan@archlinux.org>
Extend print-format with checkdepends, depends and makedepends.
Signed-off-by: Jelle van der Waa <jelle@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
alpm_pkg_get_builddate() and alpm_pkg_get_installdate() both return -1 on
error. Correctly handle the error condition in pacman.
Signed-off-by: Allan McRae <allan@archlinux.org>
Extend --print-format with all expac format strings which can be easily
added without conversions and through a simple C macro.
Signed-off-by: Jelle van der Waa <jelle@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This adds a mechanism for package builders to add arbitrary data to
packages that is not necessarily relevant enough to the package
installation process to gain first-class support in alpm. Currently
these fields have to be added to parsers with a "not actually used"
comment and can't be retrieved through the API.
Extended data is stored in "name=value" format in the xdata field
(%XDATA% in desc files):
xdata = pkgtype=debug
or
%XDATA%
pkgtype=debug
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
This allows for parsing the output of:
pacman --upgrade --print-format '<format>' pkg.zst
without having to remove info messages from it.
Signed-off-by: Allan McRae <allan@archlinux.org>
In some cases packages are built outside of a directory which contains
pkgname-pkgver, this results in source listing in debug packages having
a conflicting path like `/usr/src/debug/build/` which is not ideal.
This patch ensures we always include the pkgbase to ensure the paths are
unique.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
The feature has been introduced in commit a33cdac10b
The buildinfo version has been bumped in commit 0428f6213b
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
Currently our gitlab CI is failing due to valgrind breakage. With
Arch stripping glibc, valgrind now requires debuginfod to be active.
However the gitlab CI system combined without our testsuite does not
retrieve these symbols, even when the appropriate environmental
variable is set.
Work around this by installing the glibc-debug package directly
using a slight kludge... All blame for this approach is assigned
to foutrelis!
Signed-off-by: Allan McRae <allan@archlinux.org>
Arch Linux is adding source signing PGP keys to their package source
tree alongside PKGBUILDs in the form keys/pgp/$fingerprint.asc. As the
PGP keyserver infrastructure is a mess, this helps other people validate
sources in a PKGBUILD.
Add the keys to source packages if found alongside the PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
The documentation for the license array was specific to Arch Linux.
Remove it and some minor other Arch Linux specific references.
Signed-off-by: Allan McRae <allan@archlinux.org>
We use a multi step process during stripping to ensure permissions do
not get changed. However, if the initial objcopy fails, the subsequent cat
results in a blank file. Abandon early if objcopy fails.
Fixes FS#74486
Signed-off-by: Allan McRae <allan@archlinux.org>
bsdtar uses the "pax" TAR archive format by default, which has support for
storing sparse file information in the archive. Unfortunately this is a source
of unreproducibility because the sparse encoding is taken from the file system
and different file systems handle sparse files differently: some file systems
have no support for sparsely encoded files at all, and even file systems with
sparse file support can report different file information for identical files
due to differing implementations.
As a real world example where this happens, consider the Arch Linux package
"brotli-testdata 1.0.9-7", which contains a sparsely encoded all-zeros file
"usr/share/brotli/testdata/zeros". Building this package on a btrfs file system
yields a different package than building it on tmpfs or ext4 solely due to
different sparse file information that gets recorded in the package tarball.
To improve the reproducibility of archives containing sparsely encoded files,
libarchive version 3.6.0 introduces a new --no-read-sparse option. This skips
reading sparse file information from disk entirely and therefore stores files
"expanded" in the archive, which is the only way to make them reliably
reproducible across file systems.
makepkg will use this option if libarchive is recent enough to support it,
which is detected at build time.
Signed-off-by: Allan McRae <allan@archlinux.org>
db and pkg store a pointer to the handle for internal use but don't
actually provide a way for a user to get it.
Making this accessible is more convenient for front ends and FFI
wrappers.
For example, in other languages it's common to return the error value
directly. To achieve this the python and rust wrappers also store their
own pointer to the handle inside their own pkg/db wrappers.
Exposing this would allow the wrappers to forgo the extra pointer and
just return `pkg.get_handle().last_error()`.
Parsing of Content-Disposition relies on well formed headers.
A malformed header such as:
Content-Disposition="";
will result in a strnduppayload->content_disp_name, -1, ptr),
which will copy memory until it hits a \0.
Prevent this by only copying the value if it exists.
Fixes FS#73704.
Signed-off-by: Allan McRae <allan@archlinux.org>
In order to use WKD in pacman -U/--upgrade operations, we need to
get the packager information from the .PKGINFO within the package.
That has obvious security implications. e.g. something like this
could convince a user to download a different key to what they
expect:
packager = foo bar <>^[[2K^[[0G:: Import PGP key DEADBEEF, "foo <bar>
While downloading an untrusted key has little impact due to the
web-of-trust model used by pacman, this could be bad in combination
with an exploit that allowed trust of keys in the keyring to be
altered.
To be safe, do not use WKD when installing using -U.
Fixes FS#73703.
Signed-off-by: Allan McRae <allan@archlinux.org>
Avoid a segfault when a search of the keyserver returns that the
key is found but returns no primary IDs. We are then likely going
to fail the import, but attempt anyway because no-one know what
a keyserver will do!
Fixes FS#73534.
Signed-off-by: Allan McRae <allan@archlinux.org>
Looking up a key using WKD just ensures you have a key with the
same email address, it does not ensure that a key with the correct
fingerprint has been downloaded.
Check a key with the relevant fingerprint is available after a
WKD import.
Using meson.source_root() and meson.build_root() are deprectated in
meson-0.56. Using current_source_dir() or current_build_dir() (which
have been available in all Meson versions) would require manually
adding "../" in some places. Instead, use project_source_root() and
project_build_root() and require meson-0.56.
Signed-off-by: Allan McRae <allan@archlinux.org>
Upstream is changing the default from false to true. This makes
no difference to us, so just set as the future default.
Signed-off-by: Allan McRae <allan@archlinux.org>
We want to use -flto=auto in Arch Linux to speed up building, but we
can't hardcode it in buildenv/lto.sh because other downstreams might
have clang < 13.0.0 which did not recognize -flto=auto as equivalent
to -flto=full.
Introducing an LTOFLAGS variable to makepkg.conf seems the way to go.
Signed-off-by: Allan McRae <allan@archlinux.org>
This implements pkgtype into .PKGINFO. This is useful to ensure tools
parsing packages do not miss important context on the creation of the
package.
For instance discovering if a given .pkg.tar is a debug package, one
would have to do heuristics on the pkgdesc and "${pkgbase}-debug".
However both of these values are controlled by the packager.
Similarly, the heuristic for discovering split packages is if pkgbase
and pkgname differ, which can happen in any package as both values are
packager controlled.
This should ensure we don't need to rely on heuristics and instead
include the context of how the package was created.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
This moves us from the fairly ugly AWK parsing line to debugedit which
originally comes out of the rpm project.
The original code has issues parsing anything that was not straight
C/C++ and languages like Rust or Go would return invalid source code
files. debugedit handles all these cases better.
Fixes FS#66755
Fixes FS#66888
Fixes FS#65677
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
Adds the %a format specifier to allow printing of a target's arch
when using --print-format.
Signed-off-by: Jonathan Sköld <arch@skold.dev>
Signed-off-by: Allan McRae <allan@archlinux.org>
When trying to identify debug packages among other packages we
discovered that it's pkgname used in pkgdesc. Since pkgname can
sometimes be an array when building debug packages for a split package,
this could potentially include a pkgname that might not make sense
depending on the order of the array.
This patch simply uses pkgbase as it seems more correct.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
>From gcc(1):
-ffile-prefix-map=old=new
[...] Specifying this option is equivalent to specifying all the
individual -f*-prefix-map options. This can be used to make reproducible
builds that are location independent.
Specifically, this additionally enables -fmacro-prefix-map=, which causes
prefix mapping to be applied to expansions of __FILE__ and similar macros.
Without this option, if source files are compiled by passing the
absolute file path to the compiler (as done by e.g. cmake), any
expansions of __FILE__ (e.g. from uses of assert()) will contain
$srcdir.
Signed-off-by: Allan McRae <allan@archlinux.org>
Prints extra information provided by file conflict or corrupt package messages
to stderr instead of stdout
Signed-off-by: Oskar Roesler (bionade24) <o.roesler@oscloud.info>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is the error value generally used and the calling function
explicitly checks for -1, later causing the error to be missed
and the transaction to continue.
> pacman -S xterm
warning: xterm-369-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Package (1) Old Version New Version Net Change Download Size
extra/xterm 369-1 369-1 0.00 MiB 0.42 MiB
Total Download Size: 0.42 MiB
Total Installed Size: 1.05 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
error: no servers configured for repository: extra
(1/1) checking keys in keyring [--------------------------------------------------------] 100%
(1/1) checking package integrity [--------------------------------------------------------] 100%
error: failed to commit transaction (wrong or NULL argument passed)
Errors occurred, no packages were upgraded.
The current backup printing does not fit in with the rest of the info at
all. Change to be more consistant.
Old:
Backup Files :
MODIFIED /etc/pacman.conf
UNMODIFIED /etc/makepkg.conf
New:
Backup Files : /etc/pacman.conf [modified]
/etc/makepkg.conf [unmodified]
Signed-off-by: morganamilo <morganamilo@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add linked libraries to a packages dependency list. This is the partner
to automatically generated library provides, and thus depends take the
same format. To help with bootstrapping, library dependencies are only
added if the relevant provide exists.
Signed-off-by: Allan McRae <allan@archlinux.org>
When the option "autodeps" is enabled, makepkg will add provides
entries for libraries found in the directories specified in LIB_DIRS
in makepkg.conf. The entries LIB_DIRS array have the format
"prefix:directory". For example, the entry "lib:usr/lib" will search
$pkgdir/usr/lib for library sonames and add "lib:libfoo.so.1" to the
provides array.
Signed-off-by: Allan McRae <allan@archlinux.org>
GCC automatically detects when it is linking LTO objects, but clang does
not. Add -flto to LDFLAGS to make this work for clang too.
Signed-off-by: Allan McRae <allan@archlinux.org>
When removing files we check _alpm_access() to see if we can write
(delete) the file. If not, we check if the file exists because if the
file does not exist then we don't actually need to remove it so there's
no issue.
However the second call uses acess() instead of _alpm_access() which
does not the rootdir into account.
As per curl(1), the -q (--disable) option must be first on the command
line to disable reading the curlrc config file. Without being first it
does not appear to have any effect.
Signed-off-by: Evangelos Foutras <evangelos@foutrelis.com>
Previously, when printing a package changelog to stdout, we would write
chunks of data that were not necessarily nul-terminated to stdout using
a function (fputs) which requires the input string to be nul-terminated.
On my system, this would result in occasional garbage characters showing
up in the "pacman -Qc" output.
Fix this by never nul-terminating the chunk, and using the fwrite()
function which takes an explicit input size and does not require a
nul-terminated string.
Signed-off-by: Carlo Teubner <carlo@cteubner.net>
Allow finding which mirror was used to fetch a file.
This makes it a bit easier to debug situations in which mirrors serve
bad files with HTTP 200.
Signed-off-by: Vladimir Panteleev <archlinux@cy.md>
--dbonly is meant to only touch the database and not the actual system.
However hooks still run which can leave files in place or run commands
you may not want.
The hooks being run also means `fakeroot pacman -S --dbpath test/ foo --dbonly`
fails because alpm tries to chroot for hooks which requires real root.
Signed-off-by: Allan McRae <allan@archlinux.org>
When constructing an import question we never really used a proper gpg
key. We just zero initialize the key, set the uid and fingerprint, and
sent that to the front end.
Instead lets just give the import question a uid and fingerprint field.
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman now downloads the signature files for all packages when present in a
repository. That makes distributing signatures within repository databases
redundant and costly.
Do not distribute the package signature files within the repo databases by
default and add an --include-sigs to revert to the old behaviour.
Signed-off-by: Allan McRae <allan@archlinux.org>
Every time we modify gpg's state by signing or revoking a key, gpg
marks the trustdb as stale and rechecks it the next time key_is_lsigned()
or key_is_revoked() is called.
Currently, we alternate calls signing of keys and calling key_is_lsigned()
(idem for revoking) which means that for each key we sign (or revoke), gpg
will check the trustdb once.
To avoid checking the trustb so many times, we can simply do all the
key_is_lsigned() and key_is_revoked() checks upfront. Inbetween read
operations the trustdb is not marked stale and inbetween write operations
the trustdb is also not marked stale. This reduces the amount of trustdb
checks from 50 to 1.
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently, when running pacman-key --populate, gpg prints the
trustdb check output once for each locally signed and revoked key.
When bootstrapping a new container image, about 50 keys get signed
and revoked which leads to a huge amount of output when running
pacman-key which is repeated 50x.
To avoid overloading the user with gpg output, we add --quiet to the gpg
calls generating the trustdb checking output to silence those calls which
gets rid of the trustdb check output on the terminal.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
All of these links are broken since the recent move to
gitlab.archlinux.org.
A few projects are, apparently, only available on GitHub, so I've linked
to that source (hopefully that's only temporary).
For git-clone URLs, I've opted for the https URLs since those can be
used by anyone -- whereas the ssh URLs require the user to be registered
on the gitlab instance which is not open to the public yet.
Signed-off-by: Hugo Osvaldo Barrera <hugo@barrera.io>
Signed-off-by: Allan McRae <allan@archlinux.org>
When downloading in parallel, sort by package size so that the larger
packages are queued first to fully leverage parallelism.
Addresses FS#70172
Signed-off-by: Charlie Sale <softwaresale01@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Test for downloads that redirect to some sort of cdn where the
redirected url does not relate to the original filename.
Signed-off-by: Allan McRae <allan@archlinux.org>
Github and other sites redirect their downloads to a cdn. So the
download http://foo.org/myrepo.db may redirect to something like
https://cdn.foo.org/83749327439.
This then causes pacman to try and download the sig as
https://cdn.foo.org/83749327439.sig which is incorrect. In this case
pacman should append .sig to the original url.
However urls like https://archlinux.org/packages/community/x86_64/0ad/download/
Redirect to the mirror, so .sig has to appended after the redirects and
not before.
So we decide if we should append .sig on the original or effective url
based on if the effective url (minus the query part) has .db or .pkg in it.
Fixes FS#71148
---
v2: move variable decleration to start of block
v3: use dbext instead of db
archweb's download links all ended in /download. This cause all the temp
files to be named download.part. With parallel downloads this results in
multiple downloads to go to the same temp file and breaks the transaction.
Assign random temporary filenames to downloads from URLs that are either
missing a filename, or if the filename does not contain at least three
hyphens (as a well formed package filename does).
While this approach to determining when to use a temporary filename is
not 100% foolproof, it does keep nice looking download progress bar names
when a proper package filename is given. The only downside of not using
temporary files when provided with a filename with three or more hyphens
is URLs created specifically to bypass temporary filename usage can not
be downloaded in parallel. We probably do not want to download packages
from such URLs anyway.
Fixes FS#71464
Modified-by: Allan McRae (do not use temporary files for realish URLs)
Signed-off-by: Allan McRae <allan@archlinux.org>
Arch Linux has been setting PYTHONHASHSEED=0 to create deterministic
.pyc files. After a thorough review by the Arch Security Team, setting
this variable was determined not to generated vulnerable .pyc files, as
when the loader loads the .pyc file and unmarshalls it, the internal
runtime will just populate the unordered data structures and use a new
runtime hash for them.
Signed-off-by: Allan McRae <allan@archlinux.org>
We usually set this up to default to the build time configured install
location, but a couple of files crept in without this.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Binutils commit 93df3340fd5ad32f784214fc125de71811da72ff enabled readelf
to report "Position-Independent Executable" files. Fix stripping to
account for this change.
Signed-off-by: Allan McRae <allan@archlinux.org>
pacman_date is set to the current date during build without respecting
SOURCE_DATE_EPOCH. As a result, a build cannot be fully reproduced on a later
date because the date embedded into the man pages does not match.
In contrast, the built-in asciidoc attribute "localdate" respects
SOURCE_DATE_EPOCH and has the desired ISO 8601 format, so simply use that
instead of the custom "pacman_date" attribute.
Fixes: FS#71154
Signed-off-by: Jonas Witschel <diabonas at archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If the original download redirects to to a different url then alpm would
try to name the sig file after the url instead of <original_file>.sig.
Instead force this naming scheme regardless of url.
Fixes FS#71274
Signed-off-by: Allan McRae <allan@archlinux.org>
Since commit 08f4ae70, makepkg supports downloading from fossil.
However, the PKGBUILD man page was only partially updated to reflect
this change.
Signed-off-by: Allan McRae <allan@archlinux.org>
Comit 5151de30 tried to fix leaking memory when importing a key. However
key_search_keyserver() writes to the key passed in, making the original
uid and fingerprint unreachable, causing the new uid and fingerprint to
double free.
Fixes FS#71107
Signed-off-by: Allan McRae <allan@archlinux.org>
Around the same time retry events were added, there was a patch to pass
sig download events to the frontend. The retry code was not updated to
account for this.
Signed-off-by: morganamilo <morganamilo@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Some servers respond with error pages (e.g. 404.html) when a package is
not present. These were getting written to packages before moving onto
the next server. Reset the download progress on 400+ error conditions
to avoid this.
Signed-off-by: Allan McRae <allan@archlinux.org>
This can not be specified on its own but requires a value.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
readelf --debug-dump sometimes reports inscrutable warnings which don't
actually affect our extraction of source filenames. For example:
readelf: Warning: There is a hole [0xd3d - 0xd89] in .debug_loc section.
Now gcc 11 seems to have dramatically increased the number of warnings:
readelf: Warning: Corrupt offset (0x0000008e) in range entry 9
[...]
readelf: Warning: Corrupt offset (0x000010f0) in range entry 250
The resulting debuginfo created by the very same toolchain works fine,
as does the list of source filenames. But the warnings are quite
noisy... send them to /dev/null since they are not actionable in the
context of getting source files
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This partially fixes FS#67850
It fixes the case for -S'ing packages but not -U'ing urls.
pacman -S a/a b/b
resolving dependencies...
error: packages a and b have the same filename: a-1-1-any.pkg.tar.zst
error: failed to prepare transaction (duplicate filename)
Signed-off-by: Allan McRae <allan@archlinux.org>
When a download fails on one mirror a new download is started on the
next mirror. This causes the ammount downloaded to reset, confusing the
rate math and making it display a negative rate.
This is further complicated by the fact that a download may be resumed
from where it is or started over.
To account for this we alert the frontend that the download was
restarted. Pacman then starts the progress bar over.
Signed-off-by: Allan McRae <allan@archlinux.org>
Every alpm_option_set function clones the input so lets be more
consistent. Also this fixes servers not being sanatized.
Signed-off-by: Allan McRae <allan@archlinux.org>
When initially downloading a package, pacman will display a message
like:
wine-6.6-1-x86_64.pkg.tar.zst downloading...
Then when the download progresses the message will change to:
wine-6.6-1-x86_64.pkg.tar.zst
So instead lets match the progress message so there's no sudden change.
Signed-off-by: Allan McRae <allan@archlinux.org>
With a repo using "SigLevel = Optional" and a package already downloaded
into the cache, download_files() returns 1 (via _alpm_download) to indicate
no files were downloaded. This causes installation of the package to
fail.
Explicitly check that download_files() returns -1 (error) rather than
non-zero.
Signed-off-by: Allan McRae <allan@archlinux.org>
Restore the prior indicator whether or not databases were up to date.
0 is used to indicate if *any* db was actually updated as callers are
more likely to care about that than if *all* dbs were updated.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
An extra break causes _alpm_download to break out of the payload loop as
soon as it sees a successful url download with XferCommand.
Fixes: FS#70608 - -U fails to download all files with XferCommand
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Our callbacks require front-ends to maintain state in order to provide
reasonable output. The new download callback in particular requires
much more complex state information to be saved. Without the ability to
provide context, state must be saved globally, which may not be possible
for all front-ends. Scripting language bindings in particular have no
way to register per-handle callbacks without some form of context.
Implements: FS#12721
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
These were added without documentation in commit
a33cdac10b
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We do not need the --relative case as it is dead code (we only ever link
a filename without directory components).
For the rest, GNU-specific ln -T does two things:
- if the link name is an existing directory, ln fails instead of
creating a surprising link inside the directory
- if the link name is a symlink to a directory, ln treats it as a file,
and due to -f, unlinks it
The second case can be portably solved by ln -n, and both cases can be
solved by doing what the original autotools Makefile did: rm -f && ln -s
If the file exists, it will be removed. If it cannot be removed, it must
be an ordinary directory, and the script aborts with an error.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously TotalDownload would switch the % download from per package to
overall. Meaning you had a choice of which information to dispplay.
Now with parallel downloads TotalDownload adds an extra progress bar.
There's no reason to have this an off by default feature. Let's just
make it always on.
Signed-off-by: Allan McRae <allan@archlinux.org>
If a makepkg consumer uses a build wrapper to override compiler
flags this may lead to unreproducible packages as there is no way to
know which exact files were used for tooling that tries to reproduce
said package.
Instead of vendoring the whole used makepkg.conf file into buildinfo,
this patch adds two new properties to the .BUILDINFO file named
BUILDTOOL and BUILDTOOLVER which by default are simply makepkg's own
values. Downstream consumers may override those values: For example in
Arch Linux the devtools package can set those values and allow
reproducible builds tooling to fetch the appropriate makepkg.conf.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows architecture to be multivalued. On x86-64 machines, this
could be something like:
Architecture = x86-64-v3 x86-64
We use the first specified Architecture value in mirrorlist $arch
variable replacement, as this is backwards-compatible and sane.
Original-patch-by: Dan McGee <dan@archlinux.org>
Patch-updated-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When the download estimate is over an hour the format displayed changes
from mm:ss to hh:mm:ss. This causes everything to be out of alignment
due to the extra characters.
So instead lets just go back to --:-- when the download => 100 minutes.
Signed-off-by: Allan McRae <allan@archlinux.org>
This pkg-config file is automatically created in the meson-uninstalled/
directory of the build tree, and points to the built artifacts there. If
this directory is added to PKG_CONFIG_PATH, it will be preferred over an
installed copy.
Making this work properly means it becomes trivially possible to build a
private copy of libalpm, and then compile other projects using it rather
than the system copy.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
On Linux, SIGPOLL is a valid signal, but on systems like FreeBSD, it is
not. This patch does a preprocessor check to see if SIGPOLL is available
or not.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
On Linux, signal.h is not required to have access to the signal
constants. On FreeBSD, this is not the case and requires signal.h to be
explicitly included.
This patch adds an include for signal.h in any source file that uses it.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This patch changes the behavior of meson to define configuration options
*only* when the symbol checked is present. Currently, it defines all of
them in config.h whether the symbol exists or not and the code that
looks for it doesn't check the macro's value, but whether it's defined.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The Arch Linux mailing lists are these days served from the lists
subdomain.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
If specified, this will be used no matter what. If not, then we check if
sudo exists and use that, or else fall back on su.
Implements FS#32621
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Broken via refactoring in commit aa6fe1160b
but for obvious reasons only one person in the last 9 years has ever
actually tried to do this. Still, it's technically correct to allow it.
Fixes FS#70254
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Keep track of errors from servers so that bad ones can be skipped once
a threshold is reached. Key the error tracking off the hostname because
hosts may serve multiple repos under different url's and errors are
likely to be host-wide.
Implements: FS#29293.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The current gcc build from git master give different output from
readelf:
gcc-10.2.0
$ readelf "hello" --debug-dump | grep hello
<11> DW_AT_name : (indirect string, offset: 0xbfc): hello.cpp
gcc-git
$ readelf "hello" --debug-dump | grep hello
<12> DW_AT_name : (indirect line string, offset: 0x0): hello.cpp
This causes the awk statement extracting the file name to fail as it
relied on the information being in the 8th field. Instead, extract
the information from the final field.
Fixes FS#70168
Signed-off-by: Allan McRae <allan@archlinux.org>
Total download callback called right before packages start downloaded.
But we already have an event for such event (ALPM_EVENT_PKG_RETRIEVE_START)
and it is naturally to use the event to pass information about expected
download size.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We should not need to hardcode the path to sed as we simply don't care.
We don't check what kind of sed we found, and we're using the same one
we initially found on the PATH, which is surely still on the PATH.
At one point we did care to find the system copy of sed and hardcode it
in makepkg, because we also passed non-portable -i options to it and
makepkg needed to continue working on macOS even if some incompatible
GNU sed got installed afterward, elsewhere on the PATH. But this was
never relevant to the in-tree buildsystem script running sed.
In commit 3a814ee6bc we removed even that,
so we don't need to look it up at all.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 0f75ab3224 some unbalanced
quotes were added by the committer while editing an error message.
Fixes FS#69865
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
GCC's LTO implementation emits bytecodes into .o files it generates.
These bytecodes are _not_ considered stable from one release of GCC
to the next. There we need to strip the LTO bytecode out of any .o
(and .a) file that gets installed into the package.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add the 'lto' option to enable building with link time optimization
by adding '-flto' to both CFLAGS and CXXFLAGS. The 'lto' option can
be specificed both in the PKGBUILD or by setting the default in
makepkg.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
With the recent outages of the keyservers there is a possibility of
`--refresh-keys` failing to fetch new keys. A lot of current key
distribution is done over WKD these days, and `pacman-key` has the
ability to use it for `--recv-key`.
There was a hope `gpg` would end up supporting WKD for the refresh
functionality, but this seems to be limited to expired keys fetched
through WKD. Since this functionality isn't yet available it makes sense
to stuff it into `pacman-key`.
The current implementation looks over all available keyids in the
keyring, attempts to fetch over WKD and then fall backs to keyservers if
no email has a valid WKD available. The downside of this approach is
that it takes a bit longer to refresh the keys, but it should be more
robust as the distribution should be providing their own WKDs.
Co-authored-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
This enables us to extract files in the source array and ensures that we
can decompress files if the uncompressed signature is served.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
This reverts commit e348ba3881.
With the above commit we started caching the downloaded packages. Based
on some testing and, it saves ~30s in the "step_script" stage while
adding 18s for "Restoring/Saving cache". A net saving of ~10s.
With earlier commit, we no longer use an ancient image which also pulls
base-devel - thus the packages we have to download is minimal.
Now comparing the uncached "step_script", vs the cached one - it is
slowed by 2-3 seconds (1:01 -> 1:03), while we eliminate the 18s (and
growing) caching.
Tl:Dr: With up-to date image, package caching in not worth it - be that
time, disk or network wise.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The archlinux/base have been deprecated. Since we depend on base-devel
simply use archlinux:base-devel
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
buildenv is set once for build() and a second time for package(). When
using both distcc and ccache, this lead to CCACHE_PREFIX="distcc distcc"
in package(), which breaks PKGBUILDs that execute the compiler in
package() because distcc complains:
distcc[383041] (main) CRITICAL! distcc seems to have invoked itself
recursively!
Avoid causing this error by only adding "distcc" to CCACHE_PREFIX if
it's not yet there.
Signed-off-by: Matti Niemenmaa <matti.niemenmaa+git@iki.fi>
Signed-off-by: Allan McRae <allan@archlinux.org>
This permits storing the result of setcap during package() and applying
the resulting capabilities to the installed program. Formerly, it was
necessary to edit the binary after the fact (and thus dirty the file
according to -Qkk) by using an install scriptlet.
One problem that needs to be solved before this is useful, is preventing
the strip routine from destroying xattrs. This is taken care of in the
previous patch.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
It updates the stripped/objcopied file by creating a temp file,
chown/chmodding it, and replacing the original file. But upstream
binutils has CVE-worthy issues with this if running strip as root, and
some recent versions of strip don't play nicely with fakeroot.
Also, this has always destroyed xattrs. :/
Sidestep the issue by telling strip/objcopy to write to a temporary
file, and manually dump the contents of that back into the original
binary. Since the original binary is intact, albeit with different
contents, it retains its correct attributes in fakeroot.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When a package does not need to be downloaded but a signature does,
total download didn't count that towards the total.
Signed-off-by: Allan McRae <allan@archlinux.org>
Populating a file:// Server prevents any manually registered HTTP
servers from ever being used.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The existing CACHE_EXISTS rule takes a package, which is not suitable
for -U tests that need to be able to check for specific files.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Makes it easier to pass options when not running pactest directly.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Running "pacman -Sc" deletes /var/lib/pacman/sync/*.files.sig due to a
wrong string length being used when checking filename suffixes in that
directory. In turn, these missing signature files cause both the
corresponding "*.files" files and their signatures being forcibly
re-downloaded again when "pacman -Sy" is executed.
Since official Arch Linux repos don't use signed database files yet, this
only affects people who use custom repos with signed database files, for
which they have set the "SigLevel" directive to "Required" or
"DatabaseRequired" in /etc/pacman.conf.
Fixes FS#66472
Signed-off-by: Pascal Ernster <pacman-dev@hardfalcon.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
Starting the download process, even if there is nothing to actually
download, causes an error when pacman is built without curl and has no
XferCommand defined (like our test suite).
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Download-related config options are currently limited to builds with
curl. This causes compilation errors when those options are used
without an appropriate guard which often goes unnoticed because we all
use curl. Front-ends providing their own download callback may also
want to use these settings.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
In 19980a61e9 there was a msg added which
didn't get the string closed.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
Operations involving --sysroot and reading targets from stdin were
failing due to attempting to read targets after chrooting. Move the
chroot to happen after targets are read.
Fixes FS#68630
Signed-off-by: Allan McRae <allan@archlinux.org>
With libarchive v3.5.0 we have API to fetch the digest from the mtree.
Use that to validate if the installed files are modified or not.
As always, a modified backup file will trigger a warning but will not
result in an actual failure.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Also change the group's title to point to the group's man page.
This makes generated man pages be named libalpm_* which is more
consistent with what library man pages are usually called.
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently default_pkg_ops is accessed in two different ways.
There is get_file_pkg_ops (in be_package.c) creating a local once-off
'tweaked' copy. As well as load_pkg_for_entry (be_sync.c) which modifies
in-place and uses default_pkg_ops.
This seems rather misleading and fragile approach. Introduce a helper
for the second use-case so that default_pkg_ops is handled consistently
and essentially remains unchanged throughout.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The macro hasn't been used since 2007 with commit
7f7da2b5fc. Although it was still copied
over into alpm_list.c an year or so later with commit ca1a1871 ("More
cleanup to alpm_list")
Just remove all instances of it.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
All the required public API is annotated with SYMEXPORT, so we can just
add the meson notation, to hide all the symbols by default.
Thus we no longer spill all the internal API into the global namespace.
This is effectively a regression from the autotools build, which used
hidden and internal for DARWIN and others respectively.
The use of hidden is considered sufficient, considering:
- internal was introduced with commit 920b0d20 ("Update usage of gcc
__attribute__ flags"), referencing the GCC manual and potential
optimisations, although
- the details about the optimisations or respective benefits are close
to non-existent,
- the code/data size of the binaries is identical across hidden and
internal. While the latter produces slightly larger overall binaries.
- Internal is not widely supported - missing on Darwin, the CMake build
system lacks a wrapper (unlike for hidden)
- Internal is not widely used in projects.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently, we are erroneously exporting all the symbols via the
libalpm.so. As such, the libcommon dependency is resolved.
The libalpm.so exports are about to be resolved shortly, yet that
exposed that pacman-conf is missing a link against libcommon.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The progress bar already did this. But the init event and up to date
message printed the full file name. Unify these for consistency.
Signed-off-by: Allan McRae <allan@archlinux.org>
Generating the pacman master key can take some time on systems
without enough entropy. Warn the user that the generation may
take some time.
Fixes FS#30286.
Signed-off-by: Allan McRae <allan@archlinux.org>
In the autotools build, it only built in-tree, from cwd = doc/ and
resolving doc/../lib/libalpm
In the meson build, this accidentally worked if cwd =
pacman/builddir/ and resolved to builddir/../lib/libalpm/
But... this should always have been configured with the actual path to
the inputs. So, we will now proceed to do so.
Fixes building man3 if your out of tree builddir doesn't happen to be a
direct subdirectory of the source root.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We'll reuse the function in pacman with a later commit.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman has required libarchive 3.0 or later for quite some time mow.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
- only document public alpm items (alpm_*)
- hide typedef'd structs (_alpm_pkg_t shows as alpm_pkg_t)
- enable inline struct definitions (this stops having a man page for
every single struct)
Signed-off-by: Allan McRae <allan@archlinux.org>
With the recent 'multibar' interface changes TotalDownload has been disabled.
Now we have a new UI and we need to find another way to display this
information.
When 'TotalDownload' config option is enabled we are going to have an extra
progress bar at the bottom of the screen that shows how much of the entire
download has been completed.
Closes FS#68202
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Unlike the other main commands, -F was missing its top-level usage line in its
help output.
Signed-off-by: Colin Woodbury <colin@fosskers.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
pacman -F can take both a file(s) or a package(s) as arguments. Passing a
file is more common, so adjust to show that in the help.
Signed-off-by: Allan McRae <allan@archlinux.org>
download_files never set ret on failiure, so even when downloading
fails, the transaction goes on to commit and error out.
:: Retrieving packages...
python-packaging-20.4-4-any.pkg.tar.zst failed to download
error: failed retrieving file 'python-packaging-20.4-4-any.pkg.tar.zst' from mirror.oldsql.cc : The requested URL returned error: 404
warning: failed to retrieve some files
(1/1) checking keys in keyring
(1/1) checking package integrity
error: failed to commit transaction (wrong or NULL argument passed)
Errors occurred, no packages were upgraded.
Also make the ret checking more consistent.
Signed-off-by: Allan McRae <allan@archlinux.org>
The comment makes it seem that the result itself is an error code. But
all it does is simply return -1 to indicate an error occured;
Signed-off-by: Allan McRae <allan@archlinux.org>
It requires exposing 'move cursor to the end' function in a pacman
header file. We use it as a chance to make naming of the cursor management
functions more consistent.
Note that there is still possibility of a race condition in the cursor
update logic. 'update cursor index variable' and 'send ASCII control
symbols to console' is not an atomic operation. So if an SIGINT is
received between these two action then cursor position is going to be
screwed.
Fixes FS#67973
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
At the end of download operation our code makes sure the cursor is moved
to the end of the drawing area. But 'printonly' mode has its own if() branch
that skips this cursor alignment. Add cursor_goto_end() to the 'printonly'
codepath to make sure it does not clobber previous output.
Fixes FS#68355
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
With commit 74aacf4495 creating uncompressed .tar
packages fails.
-> Compressing package...
/usr/share/makepkg/util/compress.sh: line 70: COMPRESS.TAR[@]: invalid variable name
bsdtar: Write error
Empty the '$ext' variable for the '.tar' extension in get_compress_command() to
fix this. We would fallback to cat for 'tar' anyways.
Signed-off-by: Michael Straube <michael.straubej@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Fix typo in a comment in tidy_emptydirs().
Signed-off-by: Michael Straube <michael.straubej@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We leaked fullver and pkgarch all over the place, and only conditionally
unset the other variables. Marking them local is a more proactive
solution.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit c6b04c0465 the signing stage was
moved out of fakeroot, and thus into the main control flow instead of
create_{,src}package
While the function for signing binary packages has logic to build
and gpg-sign multiple filenames, the source package never got this
special treatment. This would be fine, except it uses the standard
variables to set define the filename... like ${fullver}, which is
usually set beforehand, but in this case is not. We don't define fullver
globally as it's an internal implementation detail, except by sheer
coincidence if PKGVERFUNC is false due to improperly guarded code.
Result: source packages didn't end up signed. Instead, we raised a logic
error:
==> WARNING: Failed to sign package file somepackage-.src.tar.gz.
==> ERROR: An unknown error has occurred. Exiting...
Instead, let's just build the version inline, since we only use it once.
Reported-by: GaKu999 <g4ku999@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If multiple files match the pattern libfoo.so*, we want to check each of
them and see if they are shared libraries, and if so, if they have
versions attached.
But some packages can have both shared libraries and random files which
match the filename pattern. This is true at least for files in
/usr/share/gdb/auto-load/, which must match the filename they are paired
with, followed by "-gdb.py" (or some other gdb scripting ext), but
definitely don't contain a shared library. In this case, we don't want
to double-report the library in the generated provides.
It's also possible (probably) for a package to provide a versioned as
well as an unversioned shared library, but in such cases a single
provides entry is sufficient to cover both cases (and the libdepends
for the depending package would contain an unversioned dependency).
Solve this by keeping track of whether we have added a versioned soname
provides already, and then only adding a maximum of one unversioned
provides *iff* there isn't a versioned one yet.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
For printf in C, width is counted as bytes rather than Unicode width. [1]
> If the precision is specified, no more than that many bytes are written.
[1] Section 7.21.6, N2176, final draft for ISO/IEC 9899:2017 (C18)
Thanks Andrew Gregory for suggesting a simpler approach.
Fixes FS#59229
Signed-off-by: Chih-Hsuan Yen <yan12125@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
In case if a package corrupted (e.g. signature or hash is invalid)
pacman tries to remove the package file to redownload it anew the next time.
Remove *.sig file as well to make sure no data is left for the invalid
package.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We forgot to remove m4/ in commit 454ea02438
and now it's tragically reminding me of autotools!
Also take this opportunity to drop some symlinks in lib/libalpm/ for
libcommon source files. In autotools these were built specifically for
libalpm and needed to be available in that directory, but the meson
setup just has libalpm depend on libcommon. So these pseudo source files
aren't needed anymore.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
FS#61661 notes that we have a comment "Defaults" value for BUILDENV and OPTIONS
but that does not necessarily correspond to what the example makepkg.conf sets.
Change the comment to "Makepkg defaults" to indicate this is what makepkg will
do unless told otherwise.
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman has multiple ways to verify package content integrity:
- gpg signature
- sha256
- md5
These verification mechanisms overlap each other. gpg signatures already contain
hash value of the package content. So if a package signature is present then
pacman ignored the other 2 hash values. This worked well with signtures
embedded into pacman database.
Recently pacman got an ability to handle detached signatures (*.sig files
located next to the package files). If pacman verifies detached signature only
then one can replace pkg+sig files with some other content and pacman still
processes it as a valid package. To prevent it we need to verify
database<->package integrity using hash values stored in the database.
This commit fixes FS#67232
The new debug output is:
checking package integrity...
debug: found cached pkg: /var/cache/pacman/pkg/ruby-2.7.1-2-x86_64.pkg.tar.zst
debug: sha256sum: 77baf61c62c5570b3a37cf0c3b16c5d9a97dde6fedd1a3528bf0cc5f96dd5e52
debug: checking sha256sum for /var/cache/pacman/pkg/ruby-2.7.1-2-x86_64.pkg.tar.zst
debug: sig data: <from .sig>
debug: checking signature for /var/cache/pacman/pkg/ruby-2.7.1-2-x86_64.pkg.tar.zst
debug: 1 signatures returned
debug: fingerprint: B5971F2C5C10A9A08C60030F786C63F330D7CB92
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
With current master version the 'keyring checking' step produces an error:
debug: returning error 6 from alpm_pkg_get_sig (../lib/libalpm/package.c: 274) : wrong or NULL argument passed
The package signature is still checked later at the integrity verification step though.
This commit fixes keyring checking and now the debug log looks like this:
debug: found cached pkg: /var/cache/pacman/pkg/ruby-2.7.1-2-x86_64.pkg.tar.zst
debug: found detached signature /var/cache/pacman/pkg/ruby-2.7.1-2-x86_64.pkg.tar.zst.sig with size 566
debug: found signature key: 786C63F330D7CB92
debug: looking up key 786C63F330D7CB92 locally
debug: key lookup success, key exists
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently the list of supported formats for an archive, is maintained in
two places. And repo-add does not actually get updated. :(
In the process, remove some of the logical duplication when calling
bsdtar/compress_as.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
get_compression_command() can now be used to do upfront checks for
whether a given extension is known to do something successfully. This is
useful when writing tools in which an unknown compression type is a
fatal error.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In some cases (when trust_remote_name is used for a URL without a filename and
no Content-Disposition is provided by the server) destfile_name will be
NULL. In this case payload data will be stored in tempfile_name and no
destfile_name is set.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
At the end of payload use it calls _alpm_dload_payload_reset()
that will free() these and other fields anyway.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The main payload final name might be affected by url redirects or
Content-Disposition HTTP header value.
We want to make sure that accompanion *.sig filename always matches the
package filename. So ignore finalname/Content-Disposition for the *.sig file.
It also helps to fix a corner case when the download URL does not contain
a filename and server provides Content-Disposition for the main payload
but not for the signature payload.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman has a 'key in keyring' verification step that makes sure the signatures
have a valid keyid. Currently pacman parses embedded package signatures only.
Add a fallback to detached signatures. If embedded signature is missing then it
tries to read corresponding *.sig file and get keyid from there.
Verification:
debug: found cached pkg: /var/cache/pacman/pkg/glib-networking-2.64.3-1-x86_64.pkg.tar.zst
debug: found detached signature /var/cache/pacman/pkg/glib-networking-2.64.3-1-x86_64.pkg.tar.zst.sig with size 310
debug: found signature key: A5E9288C4FA415FA
debug: looking up key A5E9288C4FA415FA locally
debug: key lookup success, key exists
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
In case if *.pkg exists but *.sig file does not we still have to pass
the pkg to multi_download API.
To avoid redownloading *.pkg file we use CURLOPT_TIMECONDITION curl option.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It is similar to _alpm_filecache_find() but does not return a
dynamically allocated memory to user. Thus the user does not need to
free this resource.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Current code uses an incrementing counter to check whether a function
returned error:
errors += some_function();
if(errors) { goto finish }
Replace with a more standard variable
errors = some_function();
if(errors) { goto finish }
Rename 'errors' variable to a more typical 'ret'.
Avoid reporting both ALPM_EVENT_PKG_RETRIEVE_FAILED and
ALPM_EVENT_PKG_RETRIEVE_DONE in the error path.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Until now callee of ALPM download functionality has been in charge of
payload creation both for the main file (e.g. *.pkg) and for the accompanied
*.sig file. One advantage of such solution is that all payloads are
independent and can be fetched in parallel thus exploiting the maximum
level of download parallelism.
To build *.sig file url we've been using a simple string concatenation:
$requested_url + ".sig". Unfortunately there are cases when it does not
work. For example an archlinux.org "Download From Mirror" link looks like
this https://www.archlinux.org/packages/core/x86_64/bash/download/ and
it gets redirected to some mirror. But if we append ".sig" to the end of
the link url and try to download it then archlinux.org returns 404 error.
To overcome this issue we need to follow redirects for the main payload
first, find the final url and only then append '.sig' suffix.
This implies 2 things:
- the signature payload initialization need to be moved to dload.c
as it is the place where we have access to the resolved url
- *.sig is downloaded serially with the main payload and this reduces
level of parallelism
Move *.sig payload creation to dload.c. Once the main payload is fetched
successfully we check if the callee asked to download the accompanied
signature. If yes - create a new payload and add it to mcurl.
*.sig payload does not use server list of the main payload and thus does
not support mirror failover. *.sig file comes from the same server as
the main payload.
Refactor event loop in curl_multi_download_internal() a bit. Instead of
relying on curl_multi_check_finished_download() to return number of new
payloads we simply rerun the loop iteration one more time to check if
there are any active downloads left.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When a .SRCINFO file is generated via `makepkg --printsrcinfo`, each
section is concluded with an empty line. This means that at the end of
the file, an empty line remains. This is considered a trailing
whitespace error. In fact, `git diff --check` will warn about this,
saying "new blank line at EOF."
Instead of closing each section off with an empty line, use the empty
line to separate sections, omitting the empty line at the end of the
file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
All users of _alpm_download() have been refactored to the new API.
It is time to remove the old _alpm_download() functionality now.
This change also removes obsolete SIGPIPE signal handler functionality
(this is a leftover from libfetch days).
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Installing remote packages using its URL is an interesting case for ALPM
API. Unlike package sync ('pacman -S pkg1 pkg2') '-U' does not deal with
server mirror list. Thus _alpm_multi_download() should be able to
handle file download for payloads that either have 'fileurl' field
or pair of fields ('servers' and 'filepath') set.
Signature for alpm_fetch_pkgurl() has changed and it accepts an
output list that is populated with filepaths to fetched packages.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
If it's not listed by --list-secret-key we don't care if it has been
imported into your keyring, it's unusable. And you might not have a
private key at all in the no-keyid-specified case.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We pass this to gpg -u and this gpg option can accept a number of
different formats, not just the historical hexadecimal fingerprint we
assumed. We should not barf hard if a format is used which happens to
contain spaces.
This also fixes a validation bug. When we initially check if the desired
key is available, we don't quote spaces, so gpg goes ahead and treats
each space-separated string as a *different key* to search for,
returning partial matches, and returning success if at least one key is
found. But gpg --detach-sign -u will certainly not accept multiple keys!
Fixes FS#66949
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 882e707e40 we changed message
output to go to stdout by default, unless it was an error. The plain()
function doesn't *look* like an error function, but in practice it was
-- it's used to continue multiline messages, and all in-tree uses were
for warning/error.
This is a problem both because we're sending output to the wrong place,
and because in some cases, we were performing error logging from a
function which would otherwise return a value to be captured in a
variable using command substution.
Fix this and straighten out the API by providing two functions: one for
continuing msg output, and one which wraps this by sending output to
stderr, for continuing error output.
Change all callers to use the second function.
This was broken in commit 882e707e40,
which changed 'plain()' messages to go to stdout, which was then
captured as the download client in question: cmdline=("Aborting...").
The result was a very confusing error message e.g.
/usr/share/makepkg/source/file.sh: line 72: $'\E[1m': command not found
or with makepkg --nocolor:
/usr/share/makepkg/source/file.sh: line 72: Aborting...: command not found
The problem here is that we checked to see if an asynchronous subshell,
in our case <(...), failed, by checking if its captured stdout is
non-empty. Which is terrible, and also a limitation of old bash. But
bash 4.4 can use wait $! to retrieve the return value of an asynchronous
subshell. Now we target that as our minimum, we can sanely handle errors
in such functions.
Losing error messages on stdout by capturing them in a variable instead
of printing them, continues to be a problem, but this will be fixed
systematically in a later commit.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If something like source=(..."#commit=") is used, e.g. due to failed
variable expansion, we try to check out an empty refspec as nothing at
all, and end up just running "git checkout". This happens because we
fail at variable expansion too -- so let's quote our variables properly
and make sure git sees this as an empty refspec, so it can error out.
Also make sure it is interpreted as a ref instead of a path.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In order to use gettext on systems where it is not part of libc, the
correct linker flags are needed in libalpm.pc (for static compilation).
This has never been the case.
The new meson build system currently only checks for ngettext in libc,
but does not fall back to searching for the existence of -lintl; add it
to the libalpm dependencies.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This removed all information on dependency failures if the --syncdeps
flag was not used. A better approach is needed.
This reverts commit 4246a4cc4f.
Signed-off-by: Allan McRae <allan@archlinux.org>
Given RFC 4880 provides the code to do this calculation, I am not sure
how I managed to stuff that up! This bug was only exposed when a
signature made with "include-key-block" was added to the Arch repos,
which provided a subpacket with the required size to hit this issue.
Signed-off-by: Allan McRae <allan@archlinux.org>
When building with -DNDEBUG, assert statements are compiled out to
no-ops. Thus, we can't depend on assignments or other computations
occurring inside the assert().
Signed-off-by: Allan McRae <allan@archlinux.org>
It's either a waste of work, or triggers edge cases in some packages
(like coreutils-8.31) where the source file is readonly and cp gets a
permission denied error trying to overwrite it with an identical copy of
itself.
Also while we are at it, make the variable names be something readable,
because I could barely tell what this was doing while editing it.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
While iterating over the provides array, the find call for locating a
shared library may result in listing multiple entries which by itself
does not produce a stable deterministic order and may vary depending on
the underlying filesystem.
To provide a stable listing and a reproducible .PKGINFO file the result
of find is piped to sort with a static LC_ALL=C localisation.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is not a warning, _parse_options() returns failure without even
parsing further lines and the attempted pacman/pacman-conf program
execution immediately aborts. Warnings are for when e.g. later on if we
don't recognize a setting at all, we skip over it and have enough
confidence in this to continue executing the program.
The current implementation results in pacman-conf aborting with:
warning: config file /etc/pacman.conf, line 60: invalid value for 'ParallelDownloads' : '2.5'
error parsing '/etc/pacman.conf'
or pacman -Syu aborting with the entirely more cryptic:
warning: config file /etc/pacman.conf, line 59: invalid value for 'ParallelDownloads' : '2.5'
and this isn't just a problem for the newly added ParallelDownloads
setting, either, you could get the same problem if you specified a
broken XferCommand, but that's harder as it's more accepting of input
and you probably don't hit this except with unbalanced quotes.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This was only partially implemented in the original implementation.
`pacman-conf | grep ILoveCandy` would tell you if it was set, but
querying directly by name would not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This was forgotten in the initial implementation, so it was impossible
to figure out the value from a script, or correctly roundtrip the
config file.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Now when all callers of the old alpm_db_update() function are gone we can
remove this implementation. And then rename alpm_dbs_update() function to
alpm_db_update().
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Create a list of dload_payloads and pass it to the new _alpm_multi_*
interface.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Multiplexed download requires ability to draw UI for multiple active progress
bars. To implement it we use ANSI codes to move cursor up/down and then
redraw the required progress bar.
`pacman_multibar_ui.active_downloads` field represents the list of active
downloads that correspond to progress bars.
`struct pacman_progress_bar` is a data structure for a progress bar.
In some cases (e.g. database downloads) we want to keep progress bars in order.
In some other cases (package downloads) we want to move completed items to the
top of the screen. Function `multibar_move_completed_up` allows to configure
such behavior.
Per discussion in the maillist we do not want to show download progress for
signature files.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
With the previous download interface the callback uses the first progress
event as 'download has started' signal. Unfortunately it does not work with
up-to-date files that never receive 'download progress' events.
Up-to-date database messages are currently handled in sync_syncdbs()
after the sequential download is completed and a result from ALPM is
received. But this is not going to work with multiplexed download
interface that returns the result only after all files are completed.
Another problem with 'first progress event is the beginning of the
download' is that such events time are unpredictable. Thus the UI progress
bar order might differ from what has been passed by client to
alpm_dbs_update() function. We actually want to keep the dbs progress bars
in a strict order.
To help to solve the given problems extend the download callback to
allow 2 more events - download started and completed. 'Download started'
events appear in the same order as in the list given by a client.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Multiplexed database/files downloads will use multiple progress bars.
The UI logic is quite complicated and printing error messages while
handling multiple progress bars is going to be challenging.
Instead we are going to save all ALPM error messages to a list and flush
it at the end of the download process. Use on_progress variable that
blocks error messages printing.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
curl_multi_download_internal() is the main loop that creates up to
'ParallelDownloads' easy curl handles, adds them to mcurl and then
performs curl execution. This is when the paralled downloads happens.
Once any of the downloads complete the function checks its result.
In case if the download fails it initiates retry with the next server
from payload->servers list. At the download completion all the payload
resources are cleaned up.
curl_multi_check_finished_download() is essentially refactored version of
curl_download_internal() adopted for multi_curl. Once mcurl porting is
complete curl_download_internal() will be removed.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It is an equivalent of _alpm_download but accepts a list of payloads.
curl_multi_download_internal() is a stub at this moment and will be
implemented in the later commits of this patch series.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
dload_payload->curlerr is a field that is used inside
curl_download_internal() function only. It can be converted to a local
variable.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
To be able to run multiple download in parallel efficiently we need to
use curl_multi interface [1]. It introduces a set of APIs over new type
of handler 'CURLM'.
Create CURLM object at the application start and set it to global ALPM
context.
The 'single-download' CURL handle moves to payload struct. A new CURL
handle is created for each payload with intention to be processed by CURLM.
Note that curl_download_internal() is not ported to CURLM interface due
to the fact that the function will go away soon.
[1] https://curl.haxx.se/libcurl/c/libcurl-multi.html
Signed-off-by: Allan McRae <allan@archlinux.org>
This is an equivalent of alpm_db_update but for multiplexed (parallel)
download. The difference is that this function accepts list of
databases to update. And then ALPM internals download it in parallel if
possible.
Add a stub for _alpm_multi_download the function that will do parallel
payloads downloads in the future.
Introduce dload_payload->filepath field that contains url path to the
file we download. It is like fileurl field but does not contain
protocol/server part. The rationale for having this field is that with
the curl multidownload the server retry logic is going to move to a curl
callback. And the callback needs to be able to reconstruct the 'next'
fileurl. One will be able to do it by getting the next server url from
'servers' list and then concat with filepath. Once the 'parallel download'
refactoring is over 'fileurl' field will go away.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It includes pacman.conf new 'ParallelDownloads' option that
specifies how many concurrent downloads cURL starts in parallel.
Add alpm_option_set_parallel_downloads() ALPM function that
allows to set this config option programmatically.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We (thought we) removed all modelines from the project in commit
860e4c4943, but apparently this one
sneaked in by virtue of this manpage being added to the project after
the "remove all the modelines" patch was submitted, but before it was
applied.
I must have failed to update the patch to remove it from this file also.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
meson.build gets two-space indents, but our global tabbed default was
overriding this.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
meson 0.48 added the 'debug' and 'optimization' builtin options, which
bidirectionally map to the buildtype, but in some cases where debug is
enabled, the builtype may be custom. Checking the 'debug' option lets us
detect every case currently detected, plus a few more, and does so in a
shorter and more concise manner.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This change causes expected fail tests to actually fail by eliding the
'# TODO' from the test plan. In turn, we can now properly use
'should_fail' in the meson test() rule and see these expected fail
tests in the output:
Before:
...
320/332 upgrade077.py OK 0.12679290771484375 s
321/332 upgrade078.py OK 0.12620115280151367 s
322/332 upgrade080.py OK 0.1252129077911377 s
...
Ok: 332
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
After:
...
320/332 upgrade077.py OK 0.12679290771484375 s
321/332 upgrade078.py EXPECTEDFAIL0.12620115280151367 s
322/332 upgrade080.py OK 0.1252129077911377 s
...
Ok: 326
Expected Fail: 6
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
Signed-off-by: Allan McRae <allan@archlinux.org>
Arch Linux is setting up a Gitlab instance. This adds CI for the pacman
project, testing a range of configurations on Arch and basic builds on
Fedora and Debian.
Note that asciidoc is specifically not installed on the Debian run because
it is all sorts of broken... Also, the defaults have been set to meson, with
two autotools tests that will soon be removed.
Original-file from: Andrew Gregory <andrew.gregory.8@gmail.com>
Altered-to-run-on-Arch-Gitlab by: Sven-Hendrik Haase <svenstaro@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is useful for dumb terminals that do not support escape
sequences.
Signed-off-by: Ivy Foster <escondida@iff.ink>
Signed-off-by: Allan McRae <allan@archlinux.org>
Version colour numbers are dulled in the non-verbose transaction summary
when colours are enabled.
To prevent a regression, this patch also adds handling of strings with
ANSI codes to string_length as to not break the transaction summary's
output functions when colour codes are in the package name strings.
Signed-off-by: Carson Black <uhhadd@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The GOTO_ERR define was added in commit 80ae8014 for use in future commits.
There are plenty of places in the code base it can be used, so convert them.
Signed-off-by: Allan McRae <allan@archlinux.org>
Use STRDUP() over strdup() to catch memory allocation errors.
There are still some instances of strdup left, but these are in functions
that currently have no error path and would require a larger rework.
Signed-off-by: Allan McRae <allan@archlinux.org>
realloc can fail just like the other memory allocation functions. Add a
macro to simplify handling of realloc failures, similar to the already
existing MALLOC, CALLOC, etc.
Replace the existing realloc uses with the new macro, allowing us to
move tedious error handling to the macro. Also, in be_package and
be_sync, this fixes hypothetical memory leaks (and thereafter null
pointer dereferences) in case realloc fails to shrink the allocated
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Current code accidently uses noupgrade for the NoExtract directive.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use ASCII control codes to hide cursor at the pacman start and then
show the cursor when pacman finishes.
It helps to avoid annoying blinking when progress bars are re-drawn.
Cursor is reenabled if pacman expects user's input.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Following the example of the recently added GOTO_ERR, adding the file and
line number in addition to the function name in our debug messages is
potentially useful.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is a macro similar to RET_ERR but useful in the case when we need
to record an error and then jump to some cleanup section.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since commit 2ee7a8d8, there is no cleanup needed in this function. Just
return instead of jumping to the cleanup label.
Signed-off-by: Allan McRae <allan@archlinux.org>
'output' is a list of messages that pacman received but delayed printing
to avoid messing with UI.
Such functionality is useful for the upcoming multi-line progress bar
UI. Let's move it to a separate function.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
One reason why the function returns an error is some repo
does not have any servers.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently, download_files() creates payloads for all packages then
iterates over them, calling download_single_file. This can be
simplified by looping over packages and constructing the payload as needed.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When pacman fails to satisfy deps, we might see output like the
following:
==> Making package: spiderfoot 3.0-1 (Thu 06 Feb 2020 12:45:10 PM CET)
==> Checking runtime dependencies...
==> Installing missing dependencies...
error: target not found: python-pygexf
==> ERROR: 'pacman' failed to install missing dependencies.
==> Missing dependencies:
-> python-dnspython
-> python-exifread
-> python-cherrypy
-> python-beautifulsoup4
-> python-netaddr
-> python-pysocks
-> python-ipwhois
-> python-ipaddress
-> python-phonenumbers
-> python-pypdf2
-> python-stem
-> python-whois
-> python-future
-> python-pyopenssl
-> python-docx
-> python-pptx
-> python-networkx
-> python-cryptography
-> python-secure
-> python-pygexf
-> python-adblockparser
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.
This is misleading -- the only truly missing package is python-pygexf,
but we fail to remove sync-able deps from our deplist and report
everything as if it were missing. Simply drop this extra reporting
because pacman already tells us exactly what couldn't be resolved.
Signed-off-by: Allan McRae <allan@archlinux.org>
Current flow looks like
loop dbs_sync {
loop pkgs {
if pkg.db == db then process(pkg, db)
}
}
Package sync transaction always has a counterpart in the dbs_sync list
(I cannot come up with a use-case when it is not true). So the loop can
be simplified to:
loop pkgs {
process(pkg, pkg.db)
}
Tested: 'ninja test' & manually by using pacman with this patch for a
week
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It looks like this function has never actually worked. The current list
is never set to NULL after being freed. So the new deps were just
appended to the already freed list, leading to a segfault.
Signed-off-by: Allan McRae <allan@archlinux.org>
Checksums arrays should be filled with values provided by upstream. We
currently have md5 set as an unsecure default, and are constantly asked to
change it to sha2. However, just changing the default to a stronger checksum
gives the user the impression that "makepkg -g" checksums are perfect.
Instead, change the default checksum to a CRC, to make it clear that any
checksum generated purely by "makepkg -g" is not ideal.
Signed-off-by: Allan McRae <allan@archlinux.org>
Generating checksums with "makepkg -g" only determines that the user of a
PKGBUILD has the same file as the packager (assuming no collision). This
means an upstream source could be maliciously changed and passed on as valid
by a PKGBUILD. To avoid this, it is essential that any checksums used in
a PKGBUILD are as provided by upstream.
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit e6a6d307 detected complete part files by comparing a payload's
max_size to initial_size. However, these values are also equal when we
use pacman -U on a URL as max_size is set to 0 in that case. Add a further
condition to avoid that.
Signed-off-by: Allan McRae <allan@archlinux.org>
Extracting function variables containing arbitrarily scoped variables of
arbitrary nature is a disaster, but let's at least cover the common case
of using the actual '$pkgname' in an install/changelog file. It's the
odd case of actually being basically justified use of disambiguating
between the same variable used in multiple different split packages...
and also, --printsrcinfo already uses and overwrites the variable
'pkgname' in pkgbuild_extract_to_srcinfo, so this "works" in .SRCINFO
but doesn't work in .src.tar.gz
It doesn't work in lint_pkgbuild either, but in that case the problem is
being too permissive, not too restrictive -- we might end up checking
the same file twice, and printing that it is missing twice.
Fixes FS#64932
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We previously has the maximum database size as 25MB. This was set in the days
before repos had as many packages as they do now, and before we started
distributing files databases. Increase this limit to 128MB.
Signed-off-by: Allan McRae <allan@archlinux.org>
Many moons ago, libtool was bad - I mean worse than today! It gobbled all
--as-needed and we ended up with an overlinked libalpm. This was annoying,
particularly when dealing with soname bumps in libraries pacman/libalpm had
no business linking to. Luckily we had a fix, stolen from GNOME I believe.
And with that fix, we lived in harmony with libtool for many years. Until one
day, unbeknownst to us, libtool was "fixed". We kept applying our patch,
because it still applied, but it did worse than nothing. It gobbled up our
other LDFLAGS, and our libalpm started missing out on RELRO and BIND_NOW.
This made the Arch Security Team unhappy. We will make them happy again by
stopping the patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
Running the testsuite using "PACTEST_VALGRIND=1 ninja test -C build", I ran
into the following failure:
161/332 smoke001.py TIMEOUT 30.02 s
I figure an i7 @ 3.10GHz should be enough to run our testsuite... so boost
the meson test timeout to 120 seconds (which should be enough time for
anyone...).
Signed-off-by: Allan McRae <allan@archlinux.org>
It's difficult to find it embedded inside a prose paragraph.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently, it could be misread to say that a fragment is literally
'commit', rather than 'commit=somehash'. Anecdotally this does not seem
to be obvious to everyone, and rewording it certainly doesn't hurt.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Forbid the AX_COMPARE_VERSION macro from being found in the output
configure script. If autoconf-archive is not installed when autoreconf
is run, the following error message is emitted:
configure.ac:231: error: possibly undefined macro: AX_COMPARE_VERSION
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When processing the targets for -Fx, compile all the regex ahead of
time, printing an error for each that failed to compile. Then, if they all
compiled successfully, continue with printing files.
Signed-off-by: morganamilo <morganamilo@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
This value is needed for reproducible builds. The reason is because
$BUILDDIR changes its behavior depending on whether it is the same as
$startdir, and the result is that we cannot know whether $srcdir (the
path that is potentially embedded into the final package) is actually
"$BUILDDIR/src" or "$BUILDDIR/$pkgbase/src".
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The documentation of the return types of alpm_mtree_next was incorrect.
This extended into the relevant function in be_local.c.
Also, return explicit integer values, rather than the ARCHIVE_xxx values,
to avoid unnecessarily exposing frontends to libarchive internals (even
though it makes no functional difference).
Original-work-by: morganamilo <morganamilo@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In autotools, if we wanted to run tests with valgrind, we used some Make
magic which passed arguments to pactest.py, but that doesn't work in
meson, because all arguments are encoded at configure time. Instead,
let's short-circuit the build runner logic entirely, and teach pactest
to default to running valgrind, when it detects an environment variable
set independent of the build system.
To run the tests with valgrind, we can now use:
PACTEST_VALGRIND=1 meson test -C builddir/
or
PACTEST_VALGRIND=1 make check
It is also possible, but confusing/inconsistent, to use
make check PY_LOG_FLAGS=--valgrind
We *could* add a meson option -Dvalgrind=true, but that is annoying to
reconfigure between test runs, and overall the consensus is it seems
simpler to opt in each time we want to run valgrind, as was already the
case.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We now generate the scripts using their real name, install them using
meson's builtin facility instead of an install_script, and generate the
wrapper scripts in the root of the build directory, instead of a
subdirectory.
This gets us closer to resolving FS#64394.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 9c817b6549 we made these sources
extendable, and heuristically determined the correct extraction
functions to use. But our fallback for protos that didn't have an exact
extract_* function didn't take into account that 'extract_file' matches
an actual proto... so we passed the netfile in while the function
expected a file.
Solution: the function should expect a netfile too, thereby allowing us
to delay an attempted resolution of netfile -> file, to the one case
where it is actually used. This makes us slightly more efficient in the
non-file case, makes our functions a bit more consistent, and makes
file:// extraction work again.
Fixes FS#64648
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In rare cases, likely due to a well timed Ctrl+C, but possibly due to a
broken mirror, a ".part" file may have size at least that of the correct
package size.
When encountering this issue, currently pacman fails in different ways
depending on where the package falls in the list to download. If last,
"wrong or NULL argument passed" error is reported, or a "invalid or
corrupt package" issue if not.
Capture these .part files, and remove the extension. This lets pacman
either use the package if valid, or offer to remove it if it fails checksum
or signature verification.
Signed-off-by: Allan McRae <allan@archlinux.org>
python-3.8 changed the default tar format to PAX_FORMAT. This caused
issues in our testsuite with package extraction of files with UTF-8
characters as we run the tests under the C locale.
sycn600.py:
error: error while reading package /tmp/pactest-xuhri4xa/var/cache/pacman/pkg/unicodechars-2.0-1.pkg.tar.gz: Pathname can't be converted from UTF-8 to current locale.
Set format back to GNU_FORMAT.
Signed-off-by: Allan McRae <allan@archlinux.org>
We now store key structs of our missing key info, so can not search the list
for string matches. This caused missing keys to be downloaded once for every
package they signed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously, pacman treated no matches and an error during search the
same.
To fix this, alpm_db_search now returns its status as an int and
instead takes the to be returned list as a param. Allowing front ends to
easily differentiate between errors and no matches.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We only ever use it as a bool, no need to pass a char* around.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Redirect file to stdin so wc -c doesn't print a file name that needs to
be stripped.
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Now that library/ is fully gone, we don't need this anymore.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Reads PKGBUILD into an array and replaces the pkgver and pkgrel with
bash parameter substitution, then uses shell redirection to write to to
the file. Because shell redirection follows symlinks, this accomplishes
the same thing as the previous default of using the GNU-specific
--follow-symlinks sed flag.
Removes SEDPATH and SEDINPLACEFLAGS from the build systems as they are
not used elsewhere.
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently pacman is hard coded to print the dbpath, then the error alpm
returned. Even though the error could really be caused by anything.
So instead just print the arugemnts given to alpm and not assume the
resulting error message is releated to either path.
Fixes FS#59595
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This is a useful function to update all our copyright years. Move
it into build-aux so that it is not lost in the switch to meson.
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously parseopts checked if there was an argument by checking
that the string was non-empty, resulting in empty arguments being
incorrectly considered non-existent. This change makes parseopts check
if arguments exist at all, rather than checking that they are non-empty
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Added two new functions, key_is_lsigned() and key_is_revoked()
that check whether a key has been locally signed or revoked
respectively during --populate. If the key is already signed
or revoked, it is quietly ignored.
Suggested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Matthew Sexton <wsdmatty@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
To cut down on spam during --populate, both locally signing and
revoking keys now hide the specific keys being signed or revoked,
but can be shown with --verbose. A count was added, to show the
number of keys signed/revoked during the process.
Partially Implements:
FS#64142 - pacman-key: make populate less noisy
Signed-off-by: Matthew Sexton <wsdmatty@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Adds a "?" suffix that can be used to indicate that an option's argument is
optional.
This allows options to have a default behaviour when the user doesn't
specify one, e.g.: --color=[when] being able to behave like --color=auto
when only --color is passed
Options with optional arguments given on the command line will be returned
in the form "--opt=optarg" and "-o=optarg". Despite that not being the
syntax for passing an argument with a shortopt (trying to pass -o=foo
would make -o's argument "=foo"), this is done to allow the caller to split
the option and its optarg easily
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com>
Reviewed-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Distribute asciidoc sources for all manpages instead of remembering to
add files to both variables. Fixes regression in
377d47142f which broke building the
website from a dist tarball:
make: *** No rule to make target 'pacman-conf.8.html', needed by 'html'. Stop.
(Technically this regression is already fixed by commit
942b909829, but this is just going to keep
happening, I suspect, so we should fix the root cause.)
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes issue where users were allowed to run cleanup while running
--geninteg or --printsrcinfo or --packagelist, thus mixing invalid
responses into stdout.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Exclude files with hardlinks when cat'ing all the files, and do a second
run to look at each file with hardlinks, keep track of the ones we've
already operated on, and only cat each inode once. Then use "wc -c" to get
the size of all (deduplicated) files the same way we were already doing.
Original-patch-by: Ronan Pigott <rpigott@berkeley.edu>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
zipman:
read -r protects against those evil manpages whose filenames contain
backslash escapes, (muahahaha?)
IFS= read protects against filenames with:
- leading whitespace (but no one is actually stupid enough to configure
their MAN_DIRS=() in makepkg.conf with such silly directories, *right*?)
- trailing whitespace (but likewise, no one should be stupid enough to
write an uncompressed manpage for section '1 ' or something)
Also fix several other cases where we read filenames without protecting
against surrounding whitespace, or without using null-delimited
filenames when we could trivially do so.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The BSD stat command uses %N, not %n, and was incorrectly ported to
meson.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg now complains when PACKAGER is not in the format
"name <email>".
Hide this warning when PACKAGER is unset but still warn if it is set to
something out of format.
Signed-off-by: Allan McRae <allan@archlinux.org>
This allows pacman to print the correct error message when checking keys
and libalpm has been compiled without gpgme support.
Signed-off-by: Allan McRae <allan@archlinux.org>
The dummy checksigs function never sets count to 0, leaving it
unitialized. This caused the siglist cleanup to try and free the empty
list.
Signed-off-by: Allan McRae <allan@archlinux.org>
This message was clarified for sync operations in
2b1b7b7075.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
system() runs the provided command via a shell, which is subject to
command injection. Even though pacman already provides a mechanism to
sign and verify the databases containing the urls, certain distributions
have yet to get their act together and start signing databases, leaving
them vulnerable to MITM attacks. Replacing the system call with an
almost equivalent exec call removes the possibility of a shell-injection
attack for those users.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Saving fflages breaks reproducible builds due to encoding information
specific to the filesystem that was used to build the package. This
information is not needed for packaging purposes anyway.
Including fflags also means that attempting to extract a package file as
root (or fakeroot) might result in angry warnings being printed to the
console by bsdtar, followed by a non-zero exit code, unless the user
remembers to use --no-fflags during extraction. This is unpleasant UI, even
if pacman itself won't care about these.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
With unknown uid pacman crashed. Return with error from email_from_uid()
if uid is NULL.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
If the key's uid is unknown (for example with db signatures) the
question was:
:: Import PGP key 02FD1C7A934E614545849F19A6234074498E9CEE, "(null)"? [Y/n]
Let's display a modified question for unknown uid.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
If an email address is specified, we use --locate-key to look up the key
using WKD and keyserver as a fallback. If the key is specified as a key
ID, this doesn't work, so we use the normal keyserver-based --recv-keys.
Note that --refresh-keys still uses the keyservers exclusively for
refreshing, though the situation might potentially be improved in a new
version of GnuPG:
https://lists.gnupg.org/pipermail/gnupg-users/2019-July/062169.html
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
remove_deps is called once, at the end of clean_up() before makepkg
exit. If remove_deps returns >0 (e.g. when pressing "n" in the resulting
prompt), the error is caught by the ERR signal handler. This in turns
sends SIGUSR1 to the process group, with resulting exit code 138.
In case remove_deps fails, this patch exits makepkg with E_REMOVE_DEPS
if there was no previous error (that is, EXIT_CODE equals E_OK).
Otherwise, makepkg exits with EXIT_CODE.
Signed-off-by: Allan McRae <allan@archlinux.org>
When running `makepkg -i` it may be necessary to first remove make- and
checkdepends before installing the built package - for example if they
conflict each other. This is the case for wireguard-arch which
makedepends and conflicts wireguard-dkms.
Signed-off-by: Erich Eckner <git@eckner.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
Without the -f option to wait, we might move on and try to delete the
logpipe before the process is completed.
Signed-off-by: Allan McRae <allan@archlinux.org>
The logpipe fifo can remain when exiting on a non-error condition such
as recieving signals INT and USR1. This can be seen by doing either a
manual CTRL-C to interrupt the build or by sending a signal such as:
$ makepkg & sleep 5 ; kill -USR1 $!
Remove the fifo in all cases on script exit if it still exists.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Try and find an exact match via pkgcache before iterating the entire
localdb.
Gives a noticeable speed up for exact matches e.g. `pacman -T zlib`
Signed-off-by: Allan McRae <allan@archlinux.org>
when a satisfying package is already installed, we always pick it
instead of prompting the user. So we can return that package as soon as
we find it, instead of waiting until we've iterated through all the
databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
In addition to the general issue of staticlibs linkage, linking a static
lib to a library() does not seem to generate the needed Libs.private.
Rework how we handle this entirely. Instead of relying on convenience
libraries, we will *sigh* go extract a boatload of .o files again, then
relink those to the installable libalpm, while mentioning our
dependencies again.
We still have our guaranteed static library for linking arbitrary programs
with (e.g. vercmp), and we still only generate one identical copy of the
.o files, but now we potentially `ar` it up twice, which isn't so bad.
And linking still works, and pkg-config files also still work.
One alternative would be to explicitly list our dependencies to
pkgconfig.generate with requires_private, but since gpgme might be an
elevated config-tool dependency, this can fail with:
meson.build:341:10: ERROR: requires argument not a string, library with pkgconfig-generated file or pkgconfig-dependency object, got <GpgmeDependency gpgme: True>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
LIB_VERSION is supposed to be something like 11.0.1, not simply
reiterate the project version. As a result, we ended up with this:
$ pacman -V
[...]
Pacman v5.1.0 - libalpm v5.1.0
[...]
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Not all compression types can be detected in the seccomp sandbox, so we
need to disable it. This requires either configuring makepkg to know the
sandbox is available, or checking for file >= 5.38 in which the sandbox
option is a no-op even when seccomp is disabled.
- Requires autoconf-archive for autotools version compare macro.
- meson version comparison could be made a lot simpler using meson-git.
Fixes FS#58626
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
There is no good reason to bloat the keyring by importing tons of
signatures we cannot use; drop any signatures that don't validate
against another available key (probably the master keys).
If any desired signatures get cleaned, the key can be refreshed after
importing the new signing public key.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
By default, the latest versions of GnuPG disable the Web of Trust and
refuse to import signatures from public keyservers. This is to prevent
denial of service attacks, because refusing to import signatures only if
the key size is too big, is apparently too silly to consider.
Either way, pacman needs the WoT. If pacman imports a key at all, it
means everything failed and we are in fallback mode, trying to overcome
a shortcoming in the availability of keys in the keyring package.
(This commonly means the user needs to acquire a new key during the same
transaction that updates archlinux-keyring.)
In order for that new key to be usable, it *must* also import signatures
from the Master Keys.
I don't give credence to this supposed DoS, since the worst case
scenario is nothing happening and needing to CTRL+C in order to exit the
program. In the case of pacman, this is better than being unable to
install anything at all (which is gnupg doing a much more harmful DoS to
pacman), and in the already unusual case where something like
--refresh-keys is being used directly instead of depending on the
keyring package itself, gnupg supports WKD out of the box and will
prefer that for people whose keys are marketed as being non-DOSable.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If an option is a two-part option, we print both (separated by IFS=' '),
but when grepping to see if it already exists, we only checked the first
component. This means that something like keyserver-options could only
check if there were existing keyserver options of any sort, but not
which ones.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Added gettext macro to warnings, helps, and errors for translation.
Signed-off-by: Matthew Sexton <wsdmatty@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the macro got in the way of _() macro for translation
All the macro did was make it so the writer didn't have to type
\n", stream); at the end of every line.
Signed-off-by: Allan McRae <allan@archlinux.org>
If we failed to get the pkg from pkgcache then we know no satisfying
package exists by name. So only compare provides.
Signed-off-by: Allan McRae <allan@archlinux.org>
The rust language supports $RUSTFLAGS to be used automatically in all
rustc invocations. Allow setting this in makepkg.conf (e.g. for
optimization or debuginfo support), and teach debug+strip to pass the
rustc command line argument necessary to rewrite source file paths in
the debugging symbols.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently pacman relies on the SKS keyserver network to fetch unknown
PGP keys. These keyservers are vulnerable to signature spamming attacks,
potentionally making it impossible to import the required keys. An
alternative to keyservers is a so-called Web Key Directory (WKD), a
well-known, trusted location on a server from where the keys can be
fetched.
This commit adds the ability to retrieve keys from a WKD. Due to the
mentioned vulnerabilities, the WKD is tried first, falling back to the
keyservers only if no appropriate key is found there.
In contrast to keyservers, keys in a WKD are not looked up using their
fingerprint, but by email address. Since the email address of the
signing key is usually not included in the signature, we will use the
packager email address to perform the lookup.
Also see FS#63171.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Ask the user whether they want to import a missing key before even doing
a search on the keyserver. This will be useful for getting Web Key
Directory support in place: for a WKD, looking up and importing a key
are a single action, so the current key_search -> QUESTION -> key_import
workflow does not apply.
Since only the ID of the package signing key is available before
key_search, we display the packager variable in addition to the key ID
for user convenience.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Downloads with a Content-Disposition header will typically not include
slashes. When they do, we should most certainly only take the basename,
but when they don't, we should treat the header value as the filename.
Crash introduced in d197d8ab82 when we started using get_filename
in order to rightfully avoid an arbitrary file overwrite vulnerability.
Signed-off-by: Allan McRae <allan@archlinux.org>
pacman should be able to extract an email address from PACKAGER for WKD
lookup, so issue a warning if it is not of the form
"Example Name <email@address.invalid>". Neither the name nor the email
address must contain additional angle brackets.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
If we use make dist to create the official, signed release tarballs,
those will not have meson build files by default since autotools doesn't
know what they are.
Also distribute all src/common/ files. We never strictly needed any of
them to be distributed with autotools, because the dist tarball
dereferences the symlinks (???), but only some of them were being
distributed, and meson needs them to be in the right location as we only
build libcommon from the primary files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 11ab9aa9f5 replaced a strcpy() call
with memcpy(), without copying the terminating null character.
Since fname is allocated with malloc(), subsequent strstr() calls will
overrun the buffer's boundary.
Signed-off-by: László Várady <laszlo.varady93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This includes a patch from Andrew to fix pactest's TAP output for
subtests. Original TAP support in meson was added in 0.50, but 0.51
contains a bugfix that ensures the test still work with the --verbose
flag passed to meson test, so let's depend on that.
An artificial symbol can be produced when requesting debugging symbols
and the compiler has inlined a function. These symbols will give
spurious results when listing source files for inclusion in debug
packages. This will ignore these symbols and avoid an error that can be
generated when creating a debug package.
Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
.ninja.log is only present after building (successful or otherwise) the
project, but build.ninja is output as soon as the build dir is setup.
Signed-off-by: Allan McRae <allan@archlinux.org>
These are defined by a POSIX standard, and we should assert that we have
them, or define sane fallbacks (as per sys_types.h(0P)).
Signed-off-by: Allan McRae <allan@archlinux.org>
This was ported over from the AC_CHECK_{FUNCS,HEADERS} lists in
configure.ac, but I never actually checked if the resulting CPP defines
are used. Turns out, lots of symbols, not a lot of define usage.
Signed-off-by: Allan McRae <allan@archlinux.org>
Overriding the segfault handler prevents the creation of core dumps by
the default handler, which makes debugging segfaults difficult.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If we get SIGSEGV we need to bail out quickly, leaving other signals
unblocked could lead to other signal handlers getting triggered.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently when caling alpm_trans_commit, if fetching a package restults
in a 404 (or other non 400 response code), the function returns -1 but
errno is never set.
This patch sets errno to ALPM_ERR_RETRIEVE.
Signed-off-by: Allan McRae <allan@archlinux.org>
This works everywhere that gpgme >= 1.13.0 because it is a pkg-config
dependency, and meson 0.51 adds a fallback config-tool dependency
provider that detects older versions of gpgme seamlessly via
gpgme-config.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The default state of `dependency()` is `required: true`, which means if
a dependency is not found, meson immediately aborts and does not log our
`error()` messages. meson 0.50 has builtin support for dependencies with
custom error messages.
The alternative would be to specify `required: false` everywhere, and
only then to key off of `dep.found()`.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
We haven't reached our first public release of the meson build backend
yet, so we have lots of flexibility for this... and build dependencies
are easier to upgrade than runtime dependencies anyway.
Updating meson allows us to make use of a bunch of new features that
rewquire the latest version of meson.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
bash uses POSIX extended regular expressions via regex(3), which does
not guarantee support for shorthand character classes. Although glibc
supports it, msys2-runtime does not.
Make sure the completion script works (hopefully) everywhere by being
more portable.
Fixes: https://github.com/msys2/MSYS2-packages/pull/1549
Original-patch-by: plotasse <platos@protonmail.ch>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
%X is locale-dependent, making it impossible to reliably parse and
potentially overflowing the buffer. %T is consistent across locales.
Also fixes some adjacent whitespace.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make it clearer that the targets are matched against both directories
and regular files and free up File to potentially refer specifically to
regular files in the future. File is retained as a deprecated alias for
Path for the time being to avoid breaking existing hooks and will be
removed in a future release.
See FS#53136.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
pkgname and pkgver are used as directory names within database files.
libarchive does not provide a reliable locale-independent method for
reading archive file names, causing errors when archive paths include
non-ascii characters.
This is a first step toward dealing with FS#49342, by hopefully reducing
the number of packages with non-ascii data in the wild before updating
libalpm to reject them outright.
See https://github.com/libarchive/libarchive/wiki/Filenames
and https://github.com/libarchive/libarchive/issues/587
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Reworks the UI of -F according to FS#47949
In short -F replaces both -Fs and -Fo.
Searching for an exact path (target contains "/"), causes the output to
switch to the old -Fo output. Otherwise the old -Fs output is used.
Also strip the leading "/" from targets like how -Qo does.
Signed-off-by: Allan McRae <allan@archlinux.org>
When scripting/automating around makepkg, it is sometimes desirable to
know how makepkg will be configured to operate. One example is the
archlinux devtools, which must forward select makepkg.conf variables
into a build chroot (for example PACKAGER) or use those variables itself
(for example {SRC,PKG,LOG}DEST).
The configuration file can be in up to 3 places, and should be capable
of being overridden via environment variables. It is sufficiently
complex to represent distinct functionality, and sufficiently useful to
merit easy accessibility in other scripts, therefore, let us move it
into a publicly exposed utility library.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently this tells people that the settings should not be touched, but
we should just rely on the description of what it should be set to, and
leave it up to the user. With the previous patch, makepkg aborts if an
invalid value is set, greatly reducing the danger of it being badly
configured.
Also make this clearer by indicating when it would be useful to change
the settings -- i.e. disable compression -- and ensure their described
defaults are based on the ones established during ./configure or meson
setup.
Reported-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
These variables must begin with .src.tar / .pkg.tar respectively, so
fail early if those expectations are not matched. This prevents makepkg
from creating e.g. package files literally named "./pacman-5.1.3-1-x86_64"
which are actually uncompressed tarballs.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
file 5.37 changed the gzip MIME type from application/x-gzip to
application/gzip, so support this when checking to extract source files.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since makepkg exports a public library of functions, other projects may
wish to use these functions. Highlights include parseopts or our
messaging functions.
Install a pkg-config file in order to let downstream users detect where
they can source the libmakepkg functionality. This is useful e.g. to
gracefully handle the case where a thirdparty project is configured and
installed into a different datarootdir from pacman, but still wants to
use the installed pacman's version of libmakepkg.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When the executable checking was refactored into libmakepkg, it carried
with it, usage of $E_* error codes, which need to be declared from
error.sh but are only available when the parent program already sources
error.sh; additionally, message.sh was only loaded in a parent
library, but not where it was needed, and option.sh was often loaded
when it wasn't needed at all.
util.sh, meanwhile, has always depended on message.sh functions.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The right-hand side of the [[ ... = ... ]] keyword is an exception to
the general rule that quoting is unnecessary with [[
This is usually not a problem, e.g. in libmakepkg, lint_one_pkgname will
already fail if pkgname has an asterisk, but it certainly doesn't hurt
to be "more proper" and go with the spec; it is more dangerous in
repo-add, which can get caught in an infinite loop instead of safely
asserting there is no package named 'foo*'.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Fixes "arch" and "checkdepends" never having been unset, fixes b2sums
(but not ${!b2sums_@}) being recently left out.
The "build" function used to be unset as well, explicitly unset it as a
function and do the same for other official functions as well.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The libarchive header is used in alpm.h, and several binaries include
this header. This is noticeably a problem when using e.g. the musl-gcc
compiler which does not include /usr/include by default, and thus the
build system reports:
...../lib/libalpm/alpm.h:35:10: fatal error: archive.h: No such file or directory
More commonly, this will result in compiling against potentially the
wrong headers, if the libarchive installation picked up by pkg-config is
different from the one with headers in /usr/include, and /usr/include is
in the -isystem path.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit b5191ea140 we moved to using
shell globbing to print package files for a couple of reasons including
reproducible packaging of .METADATA files.
Unfortunately, this only works reliably when the glob pattern does not
resolve to a symlinked directory due to a change in the bash 5.0
release. Note that the previous, desired behavior was rather to merely
refuse to recurse into symlinked directories, but due to an unrelated
issue, the symlink handling for globstar was reworked in a way that had
this side effect.
See https://lists.gnu.org/archive/html/bug-bash/2019-04/msg00015.html
for discussion; this may be fixed at some point, but bash 5.0 is broken
either way.
The appropriate way of handling this seems to be to use **/* to match
instead; this produces the same results on both bash 4 and bash 5, as
the ** matches any leading directory component (or none), and the *
matches any file, directory, or symlink to either one.
Fixes FS#62278
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Clang 8 warns that adding a string to an integer does not append to
string. Indeed it doesn't, but that was not the intentetion. Use array
indexing as suggested by the compiler to silence the warning. There
should be no functional change.
Example of warning message:
alpm.c:71:54: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
sprintf(hookdir, "%s%s", myhandle->root, SYSHOOKDIR + 1);
~~~~~~~~~~~^~~
alpm.c:71:54: note: use array indexing to silence this warning
sprintf(hookdir, "%s%s", myhandle->root, SYSHOOKDIR + 1);
^
& [ ]
1 warning generated.
The "tip" ref actually signifies the most recently updated branch. hg
does not support a default branch named anything other than "default",
except by creating a "@" bookmark. The correct way to explicitly update
to the default clone ref, is therefore to use one of these, rather than
"tip".
Fixes FS#62092
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
One of the callers was changed to use known_hash_algos, one was not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The current completions don't properly handle redirection operators, and
attempt to complete command completions rather than completing filenames
to redirect to.
bash-completion provides both _get_comp_words_by_ref and a higher-level
wrapper _init_completion, but the latter provides handling of redirection
operators, so switch to using that.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently this is scoped to the build() function, which is simply wrong
as it equally applies to any function. Simply moving the paragraphs up
to the main manpage section makes this clear.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In commit 1825bd6716 this was split out
from makepkg, but the warning was not properly migrated; $ext did not
ever exist.
As a result, no matter what you did, the only possible warning was:
==> WARNING: '' is not a valid archive extension.
Fix to filter based on the presence of .tar in the argument, and
building the $ext variable for all checking and messaging purposes
within the function.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In order to cache sources offline, makepkg creates *two* copies of every
git repo. This is a useful tradeoff for network time, but comes at the
cost of increased disk space.
Normally, git can smooth this over automagically. Whenever possible, git
objects are hardlinked to save space, but this does not work when
SRCDEST and BUILDDIR are on separate filesystems.
When the repo in question is both very large (linux.git for example is
2.2 GB) and crosses filesystem boundaries, this results in a lot of
extra disk space being used; the most likely scenario is where BUILDDIR
is a tmpfs for bonus ouch.
git(1) has a builtin feature which serves this case handily: the
--shared flag will create the info/alternates file instructing git to
not copy or hardlink or create objects/packs at all, but merely look for
them in an external location (that being the source of the clone).
The downside of using shared clones, is that if you modify and drop
commits from the original repo, or simply delete the whole repo
altogether, you break the copy. But we don't care about that here,
because
1) the BUILDDIR copy is meant to be a temporary copy strictly derived
via PKGBUILD syntax from the SRCDEST, and must be able to be
recreated at any time,
2) if the SRCDEST disappears, makepkg will redownload it, thus restoring
the objects needed by the BUILDDIR clone,
3) if the user does non-default things like hacking on the BUILDDIR copy
then deleting and re-cloning the SRCDEST may result in momentary
breakage, but ultimately should be fine -- the unique objects they
created will be stored in the BUILDDIR copy.
While it's theoretically possible that upstream will force-push to
overwrite the base tree from which makepkg is building (which they
should not do), *and* the user deleted their SRCDEST which they should
not do, *and* they saved work in makepkg's working directory which they
should not do either...
... this is an unlikely chain of events for which we should not care.
Using --shared is therefore helpful in immediately useful ways and IMHO
has no actual downsides; we should use it.
An alternative implementation would be to use worktrees. I've rejected
this since it is essentially the same as shared clones, except adding
additional restrictions on the branch namespace, and could potentially
break existing use cases such as manually handling the SRCDEST in order
to share repositories with normal working copies.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
gpgme in git master now supports pkg-config and with the next release we
can and should prefer its use. However, retain the legacy code that
enables building with older versions of gpgme, as a fallback.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since DUFLAGS and DUPATH are not needed anymore remove them from the
source
Signed-off-by: Santiago Torres <santiago@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
MODECMD and OWNERCMD are not used by pacman itself, so we don't need to
check for and replace them now that pacman-optimize is removed.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Makepkg used to use du --apparent-size to compute the size of the
package. Unfortunately, this would result in different sizes depending
on the filesystem used (e.g., btrfs vs ext4), which would affect
reproducible builds. Use a wc-based approach to compute sizes
Signed-off-by: Santiago Torres <santiago@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
The time logged is currently given as localtime without any timezone
information. This is confusing in various scenarios.
Examples:
* If one is travelling across time-zones and the timestamps in the log
appear out of order.
* Comparing dates with `datediff` gives an offset by the time-zone
This patch would reformat the time-stamp to a full ISO-8601 version.
It includes the 'T' separating date and time including seconds.
Old: [2019-03-04 16:15]
New: [2019-03-04T16:15:45-05:00]
Signed-off-by: Florian Wehner <florian@whnr.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
Dummy callbacks are still present to prevent compiler warnings until
libalpm is delta free.
Also remove Delta parsing from pacman.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
