Handle singly and muptiply hard-linked files separately. Also collect
information on hard linked files to avoid searching the entire package
to check for hard links.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "safe_" prefix to strip_file() and strip_lto() to indicate that
these functions are taking extra steps to ensure permissions remain
unchanged.
Signed-off-by: Allan McRae <allan@archlinux.org>
Only a subset of checks were being performed on the overridden arch
arrays in package functions. Refactor checking such that all checks
are perform on all arch arrays.
Signed-off-by: Allan McRae <allan@archlinux.org>
The decision to set the PYTHONHASHSEED variable and its value is outside
the domain of makepkg and should be handled by a distribution. Move this
file to the libalpm-dropins project.
Signed-off-by: Allan McRae <allan@archlinux.org>
Debug symbols should only be split from finally linked ELFs, not bare
object files. We're already excluding static libraries from splitting
for a similar reason.
The `.gnu_debuglink` sections are also mishandled by LLVM's LLD, which
copies them to its output. For example, this affects Arch Linux's
`/usr/lib/Scrt1.o`.
While we're here (and it changes the code less), also strip GNU LTO data
from bare objects, again for the same reason we're removing it from
static libraries, and apply static library stripping instead of shared
library stripping.
See: https://bugs.gentoo.org/787623
When objcopy encounters an already-present section, adding the new
debuglink will fail with a warning. Remove any existing `.gnu_debuglink`
section to work around this problem.
Arch Linux's `rust` package is affected by this. Apparently when LLVM's
LLD links in `/usr/lib/Scrt1.o` it will also copy the `.gnu_debuglink`
section.
See: https://bugs.gentoo.org/787623
Using objcopy can result in file permission changes. We work around this
by using "cat" to copy the temporary output file into the target. Extract
this code into a utility function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Git commands can fail in bare repositories when global git config contains safe.bareRepository=explicit.
Some users set this option for increased security.
To be compatible with this configuration, explicitly set safe.bareRepository=all when invoking git in a bare repository.
In f91fa546 (repo-add: do not recreate the database if nothing was changed),
repo-add was made to skip database write-out if there were no changes to
the database. However, this breaks the usage of repo-add to create a new
empty database: `repo-add /path/to/mydb/mydb.db.tar.xz`.
Bring back support for this use-case by always writing the database if
it is missing.
Original-patch-by: Ivan Shapovalov <intelfx@intelfx.name>
Signed-off-by: Allan McRae <allan@archlinux.org>
The Arch sharutils package was spewing messages about "Permission denied" when
copying source files into the debug package. This is due to the source files
having 444 permissions and being used in multiple binaries. Only copy each
source file into the debug package onces to avoid this error.
Signed-off-by: Allan McRae <allan@archlinux.org>
On Windows based systems (e.g. msys), running PKGBUILD linting is very
slow due to time taken spawning bash subshells. Additionally, some packages
have extreme amounts of (usually procedurally generated) splitting, which
also causes linting to be extremely slow. Provide an environment variable
to disable PKGBUILD linting.
Signed-off-by: Allan McRae <allan@archlinux.org>
Supporting git source fragments (branch, commit, tag) is difficult in
conjunction with GITFLAGS usage - particularly with the most common
use cases that reduce the amount of data cloned from the upstream repo.
Leaving GITFLAGS in place an documenting that various git source features
are not supported when GITFLAGS are in used is not an ideal 'solution'.
Instead, remove GITFLAGS support.
Signed-off-by: Allan McRae <allan@archlinux.org>
This causes issues when repeatedly building a package using the same
git checkout. There is also ambiguity of the default checkout when
trying to build from HEAD. See #142 and #143.
This reverts commit 85c421f1cb.
Add the -k parameter to the sudo call to prevent caching of credientials.
This would (potentailly) stop a rogue sudo use within a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a new error code to expose the 'not a clone of' error state of some source
providers (git and fossil). This allows other tools integrating further and
handle this specific error state.
One usecase evolves around frequently changing source locations in PKGBUILDs
of packages in the AUR.
It's extremely hard to figure out what's going from when bsdtar fails
here when we expect it to succeed. Stop tunneling stderr to /dev/null
to help users figure out what's going on when this fails.
Work around the final line not being parsed in .PKGINFO if there was a lack
of newline at the end of the file. This could occur due to utilising a tool
other than makepkg to create packages.
The missed line created a difference in the parsing of .PKGINFO between
repo-add and pacman, causing packages to be seen as invalidwith pacman-6.1.
Signed-off-by: Allan McRae <allan@archlinux.org>
Removing lock-never from the default gpg.conf file exposed a couple of bugs
in the permission checks in pacman-key.
Signed-off-by: Allan McRae <allan@archlinux.org>
We only really need debugedit while building the package, while this
check would run if you tried something like `makepkg --verifysource`.
Use the same checks as we have for fakeroot to wrap debugedit so we
don't beg for dependencies we don't need.
Fixes: 3ed08f97ec
Signed-off-by: Morten Linderud <morten@linderud.pw>
The current code treats -k/--key as a binary option which later makes it
fail parsing the argument as then the end of arguments '--' is treated
as the GPGKEY. We fix this by adding the appropriate specifier to the
long and shortopt.
Closes https://gitlab.archlinux.org/pacman/pacman/-/issues/105
Fixes: 4f43ce3e ("repo-add: use parseopts from libmakepkg")
Signed-off-by: Christian Heusel <christian@heusel.eu>
We use an extended glob here, but were relying on having it globally set
in makepkg. This causes it to fail when used in scripts.
Since scripts using libmakepkg may not want extglob to be set, save and
restore the environment while explicitly setting extglob only where we
need it.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
I'm not sure why this was originally included, but it has now become
a problem with multiple processes updating the keyring (e.g. the
systemd timer for WKD updates from Arch Linux).
Signed-off-by: Allan McRae <allan@archlinux.org>
Bailing early caused problems with makepkg failing on verify but expired
signatures. As this is often out of the packagers control, and it is
better to verify a signature than not, we try bailing as late as possible
and let makepkg warn about the expired signature.
Signed-off-by: Allan McRae <allan@archlinux.org>
Guile 2.2 uses ELF format for its byte-compiled files. These are not
normal executables, and are not strippable in the normal sense.
Given these are ELF files and detected by "file" as non-stripped binaries,
it is only possible to skip these using the file path.
Fixes#73
Signed-off-by: Allan McRae <allan@archlinux.org>
To ensure we are not dropping the return code of the `gpg` call due to
piping into `grep`, we make use of `PIPESTATUS` to check the return code
of each command separately.
Additionally, we can now distinguish between two states: The signature
does not verify (e.g. due to technical reasons) and the signature is
not trusted.
Signed-off-by: David Runge <dvzrv@archlinux.org>
Move the check for the `NEWSIG` metadata keyword contained in the
GnuPG based statusfile to `parse_gpg_statusfile()` so that it is also
run when creating the statusfile in `verify_file_signature()` and not
only when running `verify_git_signature()`.
Signed-off-by: David Runge <dvzrv@archlinux.org>
The output of
`gpg --quiet --batch --status-fd /dev/stdout --verify <signature_file> <file> 2> /dev/null`
or
`git verify-commit --raw <commit> 2>&1`
may contain binary data, if the signature has been created with an
OpenPGP implementation, that e.g. makes use of notations.
If the notation string (see `NOTATION_DATA` in /usr/share/doc/gnupg/
DETAILS) contains a trailing binary char, this will break signature
verification, as any following entry (e.g. `VALIDSIG`) will be offset.
As we are only making use of a narrow set of terms from the statusfile
(namely `NEWSIG`, `GOODSIG`, `EXPSIG`, `EXPKEYSIG`, `REVKEYSIG`,
`BADSIG`, `ERRSIG`, `VALIDSIG`, `TRUST_UNDEFINED`, `TRUST_NEVER`,
`TRUST_MARGINAL`, `TRUST_FULLY`, `TRUST_ULTIMATE`), we are applying a
filter, so that only understood terms are written to the file.
Signed-off-by: David Runge <dvzrv@archlinux.org>
